Header banner
Revain logoHome Page
πŸ”§ enhance your clutch performance with performance tool w80498 clutch wrench logo

πŸ”§ Enhance Your Clutch Performance with Performance Tool W80498 Clutch Wrench Review

3

Β·

Very good

Revainrating 4.5 out of 5Β Β 
RatingΒ 
4.7
πŸ’§ Cooling & Water Pump Tools, πŸ”§ Automotive Tools & Equipment

View on AmazonView on Π―M

Media

(2)
img 1 attached to πŸ”§ Enhance Your Clutch Performance with Performance Tool W80498 Clutch Wrench
img 2 attached to πŸ”§ Enhance Your Clutch Performance with Performance Tool W80498 Clutch Wrench

Details

BrandPerformance Tool
Vehicle Service TypeTruck
Item Dimensions LxWxH19 x 4 x 1 inches
MaterialMetal
Item Weight1 Pounds

Description of πŸ”§ Enhance Your Clutch Performance with Performance Tool W80498 Clutch Wrench

For use on 1996 and later GM trucks and vans, 4.3l Astro & Safari vans, Blazer and Jimmy SUV, 2.2L 4CYL & 4.3L V-6 S-10 & Sonoma small pickup trucks. For use on G1500 or G2500 Chevy Express, G1500 or G2500 Savanna Vans, 5.7 L V-8, suburban, Tahoe and Yukon. Designed to work with both 10mm and 13mm pulley bolts. Works with 4.3L-6,5.0L V-B and 5.7L V-8, C1500, C25000, C35000, K1500, C1500 Sierra, C2500 Sierra, C3500 Sierra & K1500 Sierra Pickups.

Reviews

Global ratings 3
  • 5
    2
  • 4
    1
  • 3
    0
  • 2
    0
  • 1
    0

Type of review

Revainrating 4 out of 5

WILL NOT fit the TOP of 13mm bolts BUT.

This tool sounds like it will fit MORE 10mm and 13mm bolt heads, but it won't fit over 13mm bolt heads. not even close!. I used it on my 2002 Olds Bravada (4.2L engine) as do most Outriders, Envoys etc so I simply removed 2 bolts (13mm) this tool into the open holes on the water pump pulley plugged in and then backed off the 2 bolts while holding the tool, used my giant adjustable wrench on the fan clutch nut, held both in place and used a little muscle strength. freed! I was so happy! But…

Pros
  • Certified
Cons
  • String shorter than other picks

Revainrating 5 out of 5

Simple and light Good for tools and equipment

Okay. I admit it; I"addicted to instruments". I bought this because I was changing the fan clutch in my '98 GMC Sierra. Job I did on a previous GM truck. And vowed that if I ever replaced the fan clutch again I would have a "tool". And I *hopelessly"drug addict". And cheaper than $20? I could not resist. It's as simple as it gets. This will allow you to hold the fan stationary while you pull the large wrench you have on the large nut that holds the threaded sleeve on the water pump drive. The…

Pros
  • Great for a small home
Cons
  • Questionable purchase for the elderly

Revainrating 5 out of 5

Great tool for GMC owners.

This fan clutch removal tool is a must have. I spent hours arguing with the fan clutch pulley and nut. Needless to say I lost. This only took two minutes. The holes on this one are too small for 13mm screw heads. The trick with 13mm bolts (like mine) is to remove two adjacent bolts from the water pump pulley and thread the tool onto the pulley exactly where you removed the two bolts. Screw in the screws flush. It's not necessary to turn it, but you can destroy the screw's threads too deeply if…

Pros
  • Excellent overall performance
Cons
  • Doubtful