🚴 Silicone Bicycle Brake Handle Sleeve - 12 Pieces Brake Levers Protector for Road and Mountain Bikes Review

This offer was too good not to be missed. I mounted the kit on my gravel bike and MTB. I also gave my girlfriend a set. We love them both! They're durable, comfortable (no more bloody joints), and a great price!

Pretty well done. I suggest putting them in hot water before putting them on the brake levers. I used them on my 2020 Turbo Levo custom brake levers and they worked great. Heat them up before putting them on to loosen the rubber.

Spray hairspray on the brake levers, then simply apply to the sleeves while the hairspray is still wet. Acting as a lubricant when wet and an adhesive when dry, the spray combines the best of both worlds. Before locking the grips, this was the MOST way to install grips.

***This is my impartial review*** They are very easy to install! Put hand soap in each of them (use a hard straw dispenser) and they slide easily. To be honest it took me less than a minute for each side. That's all! Nothing else is needed. They are comfortable and true to what others say - don't knock until you try :)

Quality and comfort are excellent as others have said. I will definitely not go back to bare brake levers after trying them. A tip for the installation. They don't need to be soaked in water. I recommend using a small amount of hand sanitizer as it is alcohol based and dries much faster than soap or oil you might use.

I bought these for my son's bike and ended up using them on the whole family's bikes. To put them on, spritz on some DW-40 and then just put them on. If you don't spray it on first, it will be difficult for you to apply it. If you don't have WD-40, I'm sure some dish soap will do the trick. The grips are dry and very tight on the brake levers. They're really easy to use and have been around for a while.

Do not buy a used brand! I've bought miles and am very happy with it. I dared this. They're EXACTLY the same quality for a little over half the price and you get six pairs. Need six pairs? Give out the rest as small gifts. Once you've ridden with the brake levers, you won't want to go back. Attention mountain bikers. They can be a little longer than your levers (as well as miles). That's easy. You just cut them to size. Serious shredders, I would give 10 stars if I could!

I bought these first to make the XT brakes a little wider. I trimmed the first one for a perfect fit. I then fitted a second one with no cut and noticed that the brake levers were a bit longer. So I screwed up one, they give you 6 pairs. After using these silicone lever pads, I found that my finger stayed on the brake lever even when my hands were wet and/or sweaty. With XT brakes I only need one finger to brake and the rest of my fingers to hold. I also installed them on my other two fat…