PILOT - PM-2104AM Pilot Automotive PM-2104 44 Magnum Six Shooter Shift Knob with Hidden Storage Compartment, for Manual & Automatic Transmission Review

I read the installation guide, then I had to find out for myself. But when I got it I only had to tighten it twice. Note: They don't always use the same sized set screws, I had to use 2 small ones and one medium. But now it's great.

If you are interested in cool campfire light effect, this is a good choice. the change was drilled incorrectly. This product may not work. The threaded holes for the hex screws must be in the same horizontal plane. Not even close.

I don't usually go bad but this was disappointing. I know you get what you pay for, but really? If the makers of this shift knob sell it for $15, at least make it last longer than 2 weeks, not a cheap toy. I don't break my stuff the first and last time I buy it.

Very easy to fit, glad I bought two, the first cracked after the first week and the second rattles constantly. It's mostly cheap plastic, looks nice but having to constantly tighten to keep it from loosening is annoying, the screws don't seem long enough, I used the longest ones and the metal just crumbles everywhere when it rattles. , as well as with a delay.

Had to invent spontaneously during installation. You will need to cut off the top of one of the inner shims to slide the derailleur down and then use another shim on top to hold it in place. Note that it's generic and you may need to play around with it to get it right, but everything was included in the package to make it work, so that's good. To me, this is more suited to an automatic than a manual.

Installation that still exists. To install, simply tighten these 3 allen screws and connect the top and bottom of the case. Start the car, drive a mile, stop. Retighten the 3 Allen screws and connect the upper and lower cases. Restart your car and enjoy another mile of driving. Don't forget to pull out and tighten the 3 socket head cap screws, rotate the body and drive 2 miles. Tighten, tighten, tighten, tighten It's fun and you'll never finish the install. Get yours today!

Okay I installed it on a Tacoma Sport 09. It's solid and looks great, but I changed it. I used the thickest bushing and set screw and glued and installed an industrial grade aluminum bushing. Used for a week. Felt loose and not centered on the shifter shaft. Remote control. The whole assembly came off in one piece. Insert two bronze bushings pressed into the base. JB is welded inside with a long stick. Added a little to the thread when the shaft. The palm clattered. The night got up. Hard as a…

Nonsense! Unfortunately, it's not as durable as it looks cool. The plastic ring broke but since I was riding at the time and couldn't change the shift knobs I had to use it. Well, at least until I caught a nice bump after moving to 3rd place. My jeep had no doors and it jumped off, hit the ground, rolled right out of the jeep onto the freeway and I really had to drive home because that was all that was left but the bottom plastic ring. Revain was thrilled after a good laugh, they gave me a…