Plug And Play LED Anti Flicker Resistor Decoder For H11/H9/H8 - Error-Free XtremeVision® (1 Pair) Review

This fixed my dash light that said i had a burnt out bulb from installing led headlight bulbs. Defiantly mount to metal surface as they do get hot. Hot enough if touched after a bit of time on will melt skin. Would buy again thou and soon for other car they are reliable and was just plug and play besides mounting.

I bought LED headlights size 9003 and LED fog lights size H4 for my SUV. With all 4 LED's installed, the fog lights wouldn't turn on and the headlights would stay in bright mode. I installed just one of the anti flicker/load resistors and everything worked perfect. If you are having similar issues, to test you can have one headlight bulb LED and one bulb halogen and everything should function properly. This will tell you that the LED's do not create enough load on the circuit.

Alright so we plugged them went smoothly. Noticed one night we had no lights at all. Removed the harness and got burnt in the process because the resistors failed and began to smoke. Could have caught the car on fire if it went Untouched.Led Headlights work fine without them just wouldn’t stay on Vince buying a flicker harness.

Horrible product! Not only did it not resolve the flickering issue on my 2011 Mini Cooper, but it also go so hot that it melted the housing of my headlight! To say it was hot to the touch is an understatement.this product is an all-out FIRE HAZARD. Beware, and STAY AWAY.

Installed these 9005/9006 anti flicker resistors on my 2011 Dodge Avenger 3.6and they appear to work as advertised however the advertisement also states "these resistors get hot" and that is a ridiculous UNDERSTATMENT.At an ambient temperature of 80°F my thermal probe reads 365°F at the aluminum body of the resistor and 231°F on the wires.If my car doesn't burn to the ground first I'll be attaching each pair of these to an aluminum heat sink with some thermal compound in an attempt to wick away

It fixes my low beam failure but i would highly suggest you buy a more quality product. This product is a safety hazard. These resisitors get extremely hot, like hotter than the engine hot. I would not recommend this to anyone unless you want your vehicle to catch on fire. I took these off 2 minuts of my lights being on as they were getting to dangerously hot. Im going to spend the extra money and get the real thing.

Worked perfect! The resistors get hot mount on metal. This eliminated my check bulb light on 2009 Ford Explorer with Led lightbulbs! GREAT product!

The product works as described. The only issue I had was the wire had pulled out of the side of the resistor. I made it to work so I soldered the wire onto the resistor and heat shrunk it. If I had time I would have returned it and gotten another set but I didn't have the time so I dealt with it.

I installed some Auxbeam F 16 series LED headlights into my 2013 Jeep Wrangler, and I noticed a tiny flicker when the engine was running. I bought these hoping it would resolve the issue, however they have made absolutely no difference from the moment they were installed.

Did what they should have done, no more computer glitch. Never had a flicker so I can't say they do anything for thay Thanks for attention.

These DID stop them from flickering. I'll give them that. But the HID set up still turned off within 2 seconds. I attempted to reach out to customer service, and got no responses. So I returned them.

Ordered these at suggestion of manufacturer of LED 9005 high beam headlight bulbs which flickered badly in the daytime running light mode. Installed according to instructions and they did not work at all. 2014 Toyota Camry.

Terrible. They work as intended however they get way too hot and melt any plastic around it. Better if mounted on metal. Seller should state that to prevent damage to car.

It stopped working and when i tracked the problem down to these they were super hot that it melted the plastic on the plug.It could have definitely caught on fire if not found.

These things suck. They run so hit, they melt any plastic they touch, and out of 2 sets that I've bought, they both end up cutting out within 4-5 months. Completely unacceptable. I'll never buy this type or brand again! I've had great luck with all the Auxbeam products, and I'll never cheap out again.

For Jeep Commander and worked great. Plug and play simplicity. Only odd thing is I had to reverse the connection to the car. I am going to put this one on Jeep for having horrifically bad electronics and wiring. The LED bulbs run great, burn steady and have no issues.

Brand new out of the box I had to wiggle the cord around once they were plugged in to get the light to come on. My headlights still flickered. My car still came on with the headlight out warning. Trash.

The plugs were not attached properly. Lucky I know how to fix that problem. If you are not able to redo wire connectors spend a bit more money on better resistors

I was getting cel after installing a new set of led bulbs. I tried several resistors that didn't work. Finally these did the job. I am thankful. They work great

The principal function of the product work appropriately, the prices is adecuade and the Delivery was fast Thanks for attention!