🚗 Panglong 2 Set Rear Leaf Spring for Club Car Precedent Golf Cart: Complete Bushing and Sleeve Kit for 2004 Up Models - 102506601 102506301 102506401 Review

I bought a used golf cart with both front wheels facing different directions; There is no longer any rubber in the existing bushings. These guys took care of it pretty quickly and now I can go straight!

Perfect fit for our Precedent Club Car. Installation was easy. I've read reviews on other jacks that the DS and Precedent models have slightly different jack lengths so I spent a few bucks more on this and was very happy with the result.

The end cap is too thick for the previous cart making it very difficult to fit in the front spring mount of the previous cart. It also causes additional wear on the hub end caps because they are too thick and compressed to work as intended for the previous bogie.

The sockets did not fit and did not fit in the spring supports. I ended up having to remove the springs completely, open up the holes for the springs and press them in to fit with a vise. I ended up installing them, but it was a lot more work than it should have been.

This kit is required to replace the rear spring bushing AND the brake caliper (12 rubber bushings total). Other kits usually only include spring bushings (8 rubber bushings total) which I originally order from another parts supplier. I cut off one of the pairs of bushings by about 1/8 inch, after which they could be pushed all the way into the bushing. I only gave 4 stars because the price is a bit high.

The rear hubs on my club car were completely worn out so they were badly needed. Seems to be good quality but time will tell. The leaf spring bushings fit fine (other than trying to align the holes). However, the bushings for the rear mounts were found to be too wide. I had to cut off the small end of one of the bushings to get it to fit properly. Even then, the combined width of the lugs and struts was too wide to fit the mounting bracket. I had to shave off the big ends of the bushings before