A-Premium Splash Guards Mud Flaps Mudflaps for Toyota Camry XSE SE Hybrid SE 2018 - Front & Rear Wheel - 4-Piece Kit Review

I left the wings as is with no paintwork. For the front mounting I use screws from the car. The same for the back, only I have to screw in a different screw. It's very sturdy, unlike other reviews that say they have to use double sided tape. For the front wheels I don't need to remove the wheel, but I removed the rear wheel for clearance. To raise the car I use my hydraulic jack. I have to lie down to find the nest point. The jack point is almost impossible to see unless you are on the ground.

Firstly they are not easy to fit on the rear unless you remove the rear tires. You will need a very small Phillips screwdriver if you don't have one. The front wheels are a little different - if you spin the wheel - you can easily mount the guards. The screws/bolts in the front are quite different from the ones in the back. I found it better to use the original screws/bolts on the front rather than the handles that came with the flaps. Take your time and do it once. Once mounted they look very…

Fits 2019 Camry SE. The screws provided fit well but are only used for the rear fenders. It was also necessary to purchase an extra nylon square compression nut and U-nut from a home store. If you remove the clips from the rear bushing there is another hole to insert a nylon nut for the third bolt. Use the adjusting nut to clamp the plastic piece over the bottom hole (you'll also need to pull back the guard) so you can screw in the bottom screw. I didn't have to remove the rear wheels. I just…