🔫 Gedu High Pressure Spray Gun 1000cc Cup, 2.5mm Nozzle - Silver Finish Review

I have used a Dynasty pistol in the past with a 2.5mm tip and this pistol is of much better quality. Spray acrylic paint directly from the can. Great pistol for the money

I sprayed a small room and some furniture with it and I get very good results with Benjamin. Mur Auro colors. I diluted with about 15% water to increase viscosity and the result was good. Might be a little trick dialing in as the factory settings didn't want to draw very well, but when I dialed it in after 10 minutes of play it just worked and worked fine. Produced a constant flow and was easy to use. I increased the pressure on my compressor a little and then adjusted it again. I don't use…

I've been looking at airless sprayers but I already have some HVLPs but they didn't work very well with latex paint. Thought I'd try this and it works great. First off, this isn't a cheap Chinese instrument, it's actually made in Japan, all metal and no plastic anywhere. Setup was easy, similar to HVLP setup. The pressure should be set at about 45psi, but with the trigger pulled it is about 35psi. I had small clogs, but these are easily cleared by wiping the tip. I used Kilz 2 primer (diluted…

I just received this item and right out of the box I was impressed with the quality. Full metal components, 3 different adjustment knobs and easy bowl attachment to gun. Includes 2 air hose fittings, 1/4 and 3/8. A lot of instruments don't even have that. I assembled it, filled it with paint and was ready to go. Now for the good. About painting. Insanely beautiful performance. Very nice and even spread. The 3 adjustable valves are great AND METAL. There is no cheap plastic here. There is a…

Good: looks good, nothing more. Cons: First, the connector doesn't match the compressor hose. He was too big. I don't know what type of hose it fits, but it didn't fit the universal compressor hose quick connector. Went to the hardware store to try and find a similar fitting to match the quick connector. Luckily they had it. When I got home, I connected everything and tried it out. It was now leaking air because the fitting was not fully sealed. It's impossible to tell if the original fitting…

I use a couple of my own touch up guns at work instead of the inferior quality ones provided by my employer. Before that, my weapon of choice was the PNTGreen marker with the 2.0mL tip. I still love this gun because it's definitely the best price around $27. I've tried other shotguns on Revain and while some of them are good they usually fail a 4 month test of daily use. I had a cheaper gun of the same design as this one and although it worked well the safety pins in the gun quickly started to…