Rigid Hitch Pair of 5-Bolt on 4.5 Inch Hub Assembly (AKSQ-2000545) with (2) 1 Inch Straight Square Spindles and Bearings Review

good kit. However, as another buyer mentioned, the pinhole is in the wrong place. If you tighten the castle nut enough to seat the cotter pin, the bearing will self-destruct. I used smaller diameter, heavier cotter pins.

They were perfect for welding a rig to move my shed. Came with everything you need. Excellent kit. I used tow truck wheels and 1-1/2" x 3" square steel tubing. Very strong stock. The instructions were clearly written and accompanied by a picture to ensure everything was in the correct order. worth your money!

Good quality overall but after installing the axles I noticed the castle nut was not screwed in deep enough to use the cotter pins provided. I've tried multiple times on both axles and could only open about 1/2 of the hole with proper preload on the bearings. Either the plugs were not machined properly or the pinhole was set too wide. I was only able to thread a piece of 3/32 TIG wire through the hole to hold the axle nut. No big deal, easy fix.

This is a great product for the price. The only mistake I made was ordering a cheaper one from Revain (RAPartsinc #008-259-05), it was rusty to begin with and the eyebolts were crooked. But this product was fantastic, each piece came in its own box then was placed in another box and that box was bubble wrapped in another. (This impressed me because the other box was broken when it arrived and the pieces were loose). Then I went to check and everything fitted perfectly (no rust or crooked…