📺 RiteAV - VESA Adapter Mount for LCD & Plasma TVs, Expands to 200 x 200 mm Review

Very well made from durable aluminium. The holes are also countersunk to allow concealed mounting to an existing bracket. Worked great at 24 in Scepter including hardware but I still had to advertise my own washers as the screw heads were too small for the spacers provided. Overall good value for money.

I'm trying to mount a 100x200 Sony VESA TV to a standard mount and it worked for me, although I figured it out myself and bought my own screws had to. One star deducted because the kit doesn't come with any instructions and the loose bag of screws and washers didn't help a bit either.

Works great! I used this to adapt the ergotron arm to Centiq 27qhd. Although the screws are recessed into the plate, I was concerned about possible scratches on the Cintiq's case. I fixed it by simply covering the plate with tape before screwing it to my monitor! It comes with all the hardware you might need to mount a screen. further.

I installed the Lenovo M73 Tiny directly onto it with the 125mm holes and then installed the entire assembly on a 32" Samsung TV. This allowed me to mount the adapter on a standard TV wall mount. The PC is fixed between the TV and the bracket with 1.75" stands and M8 screws. Because the TV is incredibly light, the extra offset isn't an issue. I set up 6x TVs this way for a very elegant hidden PC solution.

Not suitable for 200x100 without drilling your own holes if you want to mount it flush with the bottom of the plate. If you don't want or can't, this plate will not fit your 200x100 mount, it should be mounted in the middle. This is when you want to install it flush with the floor. On my monitor, the middle bracket would leave the plate hanging under the bottom of the monitor and look like crap. Otherwise it's a solid board.

I'm trying to mount a Sony 100 x 200 VESA TV to a standard mount and it worked for me, although I had to figure it out myself and buy my own screws. One star deducted because the kit doesn't come with any instructions and the loose bag of screws and washers didn't help a bit either.

I installed the Lenovo M73 Tiny directly on it with the 125mm holes and then installed the whole assembly on a 32 inch Samsung TV. This allowed me to mount the adapter on a standard TV wall mount. The PC is fixed between the TV and the bracket with 1.75" stands and M8 screws. Because the TV is incredibly light, the extra offset isn't an issue. I set up 6x TVs this way for a very elegant hidden PC solution.

I had a small touch and needed to install a new larger TV. The thought of ripping off my beautiful hand and paying for another one was not a pleasant thought. This adapter plate was exactly what I needed. Screw the adapter plate to the smaller head on my arm and then attach the TV. Simple, very reliable and works great. I had to purchase screws for my TV, but this was to be expected given the wide variety of sizes required for all the different TVs on the market. Trip to Home Depot and I had…