Room temperature and humidity sensor Aqara Temperature and Humidity Sensor white Review

Apparently the Chinese version, because everything is in Chinese. But it works clearly. Took off a star because of the battery. And yes, this is exactly the same sensor that sells for twice as much!

I connected instantly to station 2 directly and registered in UDYA without any problems (I don’t have a separate zigbee hub from aqara). All three parameters - temperature, humidity, pressure shows, graphs draws. The battery level also shows. It is written in scripts. There is no setting for sending push notifications, but this is not a sensor problem, but a problem of "unfinished" UDYA in general, but in principle it can be solved with the help of scripts and "crutches" :). In general, a…

I got there immediately; it's roughly 3 by 3 centimeters. Comparing the switch to the photo, it is clear which is which. easily connected to UDYA via Akara's gateway.

Well, look at the photo, what a charm. Added with the help of the hub immediately to Akaro, Alice and Homkit. But xiaomi for some reason is not, but it does not matter. Scenarios linked to the sensor immediately appeared in applications.

The Chinese version is fully compatible with the 2022 region - the only difference is in the box. Smaller than mi bluetooth sensor.

Easily connected to aqara hub. In the aqara home application, it shows three parameters, but in devices, only temperature and humidity. The battery is already inside. The kit also includes a sticky tape in the form of a ring.

This sensor is for China. What can be ignored. Instruction in 2022. I connected Max to the station through the Aqarq M1S gateway, no problem. Alice says temperature. Humidity, pressure.

Sell. The characteristics of the product say that it works with House with Alice. But in fact, it is not even suitable for the 2022 market.

The data is transferred to the Smart Home application (from ), you can also ask Alice about the indicators. I haven't tried setting up scripts yet.

I use two sensors in different rooms. I correct with voice commands using the YANDEX smart speaker. It's comfortable. The actual size of the sensor in the photo.

I am satisfied with the purchase, I quickly connected to Station 2. These are my first devices on ZigBee, in the future I plan to expand the smart home system with Alice

Has pros: Works great with Xiaomi smart home system. Accurate graph of temperature and humidity measurements, monthly statistics are visible Its cons: Sometimes loses connection with the base unit, although it is 4 meters away from it in line of sight

Got pros: It works perfectly (slight error) controls the humidifier through the smart home (at low humidity, the humidifier turns on for us, at high it turns off) very convenient Has some cons: I didn’t find it, it would be great if there was a small screen, otherwise every time you have to ask Alice for temperature or humidity

Some pros: Works! And works directly with Alice! Set up automation to turn on / off the heater 👍 Its cons: The temperature transmission, it seemed to me, has a chaotic interval .

Some pros: good sensor, shows temperature, humidity and atmospheric pressure Some cons: works uncertainly at a distance of 40m, loses connection with the gateway

Some pros: It is convenient to monitor temperature and humidity online. Has some cons: sometimes falls off (fixed by pressing the button for 3-5 seconds, it reconnects)

Different pros: - easily connected to Station 2 - shows everything that is stated Some cons: - a qr-code with a link to the instructions is glued on the front side of the package. If you tear it off, then glue remains. A trifle, but still not very

It is glued to the adhesive tape from the kit, it is easily connected to Aqara home, after which Alice immediately saw it. Based on the sensor data, I turned on the humidifier and air conditioner. I will take more.

I took it to each room, connected it to the Station, taught the air conditioner to turn on and off according to their testimony. Satisfied!

Pros: compact. It also shows atmospheric pressure, though in kilopascals . got attached to the mi home mod from vevs without problems. It works great outside, although you probably don’t need to put it in the rain and snow . Different cons: Through the ceiling, one brick and two walls made of timber, it does not connect very well with the gateway. Flies frequently. The problem is solved by installing another gateway closer to the sensor.