Rusco Separator Sediment Water Filter Review

This filter works but probably too thin for the screen, 40 to 80, 80 is better for the filter screen size. Just a note. If the screen fails, replace it with an 80.

This works very well in removing sand from our well water. I wish we had delivered a year ago! We installed it ourselves and it was an easy task once you know the basics of plumbing.

Filters well, too good for my irrigation water. I have to clean them every day and take the filter out and clean it with a soft brush at least once a week. Since it is a transparent plastic, the filter will get a lot of algae if you don't protect it from sunlight. I will buy replacement filters, not so tight.

We called plumbers and wells all over Fort Worth looking for a sand filter for our well and ended up getting exactly what we needed from Revain. We even bought two extra filter pads to have on hand. We are very happy that we don't have to re-pipe to accommodate only what we were able to find on site.

I bought a new house on a lot with a well while the heavy sand, sediment and minerals are expected in my area Running-in time of the sanitary facilities. This rotating sediment filter is installed at the waterline just before our 3-stage filtration system. It's amazing how much sand and sediment it catches, thus prolonging the life of the cartridge. I recommend using this product.

Our department pumps water from a nearby natural stream to irrigation systems throughout the community. I have had many problems with occasional clogs in my micro sprinklers. The water often contains algae, silt and silt. Now that I have this filter installed, instead of cleaning each of my watering timer stations, I only have to flush the filter once a week, saving me hours of time and effort!

Our well pump seems to pump sand and fine mud. Our secondary string filters jammed and popped, a real mess. I put one of these in front of a thread filter and it caught 95% of what would get into our system. The only problem is that cleaning is required about every 3 months or the water consumption is reduced. I bring the hose from this device to the drain, which you can use to drain the sludge removed from the grid. Cleaning takes about 2 minutes and requires no specialist knowledge.

Installed device After reading the suggestions choose this device Easy installation When switched on, the device was clogged in less than 30 minutes Micron pre-filter filter and replace the current block with one stainless steel filter. Installation requires gluing, which is a short section in my installation. Debrief via email I was told that basically a new block would have to be bought with a 30 micron stainless steel filter and an additional 100 ss filter. to replace the current filter. I…

Our well pump handles some sand and fine silt materials. Our secondary string filters jammed and popped, a real mess. I put one of these in front of a thread filter and it caught 95% of what would get into our system. The only problem is that cleaning is required about every 3 months or the water consumption is reduced. I bring the hose from this device to the drain, which you can use to drain the sludge removed from the grid. Cleaning takes about 2 minutes and requires no specialist knowledge.

I wanted a sand filter with a transparent body and couldn't find it anywhere. Raven comes to the rescue. While I would have preferred the inlet and outlet ports to be smaller, I reduced them to 3/4 and the device works great. Just what I needed, when I needed it and at the right price. I've had it for two years now and it has easily solved my sand problems. If the valve is correctly positioned during installation, cleaning the strainer is not difficult. My faucet cartridges and fill valves…

Device After reading the suggestions I decided on this unit Installation was easy After turning it on the unit was plugged in less than 30 minutes Company called and they said me that I need to install a 30 micron filter and replace the current block with a stainless steel filter. Installation requires gluing, which is a short section in my installation. Debrief via email I was told that to replace the current filter it was basically necessary to buy a new block with a 30 micron stainless steel