🚐 12 Volt RV Vent Motor: D-Shaft 1/8" Replacement Motor for Travel Trailer Camper Bathroom Exhaust Vent Range Hood Review

✅【12V Power Vent Motor】This motor is replacement motor for 12V RV roof vent fan. Brush DC motor with 0.125 APM rating, 1.5W working power; 5,000 RPM; Can be used to power an RV vent fan such as a bathroom fan or a range hood fan, good to dispel moisture or smells. ✅【1/8"(0.125") D-Shaft】The fan motor body size is 2-1/5 inch length x1-2/5 inch diameter (57mmx36mm), D-shaft size is 1/8 inch x 3/5 inch(3.17mm x 16mm), 18AWG*2 terminal connect cords (White 20-inch/50.8cm with 7-1/4-inch/18.5cm black jacket; Black 8-inch/20cm with 5-1/2 inch/14cm black jacket). ✅【ROTATION 】This rv vent motor has reverse polarity, meaning that it can be wired to turn in either clockwise or counter-clockwise rotations; Rotation direction depends on your fan blade wiring (one wire goes to the hot side of switch, other goes to ground); To determine the direction of spin on your existing fan, look down through the motor at the top of the blade. ✅【Competiable Brands】This fan motor is compatible for vents like Elixir, Heng's, Jensen, Ventline and similar 6-inch (15.2cm) fan blades. Pls check pictures and dimensions carefully before you order. ✅【Easy to Install】Wire your fan to the motor switch, then wire the switch to your RV; Ensure that the wires connect black to black (grounds) and the other wires connect together; Save your old fan blades – Pull on the hub (center part of blades) off the shaft and push the center hub of the blades back on the new motor shaft (Flat side on motor shaft used to align the hole in the hub and slide on); Mounting screws and fan blade not included.