All the advantages and characteristics are described by a bunch of reviews. Everything will work perfectly with the declared characteristics with the correct installation and choice of motherboard (top slot, PCIe gen 4, good heatsink, ventilated case)

Excellent high-speed SSD, 10 operating system is loaded in 3-4 seconds. The screen can be compared with the 970 EVO. So far no complaints.

Various advantages: There are no issues with the work that has been done on the Samsung "pro" brand of hard drives, which I have been using for a number of years now. Everything is steady and can be reliably predicted. Transition from MLC to TLC comes with its share of drawbacks. On the other hand, with the possible exception of a lower level of durability, there were no drawbacks discovered.

The computer was on an ssd. worked smartly. This is when reading at 500MB / s. But when I put m2 at a speed of 6.5gb / s, the computer generally works like a bullet. But note. The speed is only inside the drive. if you decide to transfer from it or to it from another drive that is slower, then the speed of transferring the file will be limited by the possibility of a slower drive.

For a long time I chose an ssd disk for a laptop for the system and installation of office programs. After digging around the forums for a couple of weeks, I chose this disk, if I briefly describe the result of studying the forums - the disk is reliable and very fast, but it heats up (it is advised to use it with a radiator), I have not tested it in work yet. Pros below: Reliability from a well-known manufacturer (I believe that the disk will work for many years) and very high speed (read /…

Its pros: Convenient system transfer from Samsung sata to Samsung M.2 in one click. performance. PSI express 4th generation Cons: Expensive compared to others, but I'm willing to pay a little extra for performance

Different pros: Read and write speed. It is heated not much above 41gr. without additional cooling, the temperature did not rise. Cons: Rapid consumption of resources. The maximum resource for this drive is 600TB. In a few weeks of use, 416GB was used up. Although the swap file is moved to another drive.

I took for work to drive a stand from virtual machines. The fastest at the time of the review is the SN850, but the store did not have it and did not want to wait. I took this one, it is the second fastest (but very close to the leader) from what is now on sale. There was a BarraCuda 520 before it, and the difference is huge, noticeable even to the eye without any tests. But I did the test. Here people write about some tens of seconds - after pressing the computer button near the floor, while I

I use this on a system with a Ryzen 3900X, I'm quite satisfied. The speed of work is cosmic. Only the RAM-disk works faster, and then, on household AMD - 3 times in total (server ones at least 8-channel, and not 2, like household ones). I took a couple more for RAID0 on PCIe 4.0 - let's see how much faster the compilation of one monstrous project will be. So far, these disks are cheaper than RAM;) Well, it's a pity that I have not yet found a solution with PCI bifurcation to use a PCIe 4.0…

Of course, I lishkanul taking 980 pro looking through which version of pci-e the disk itself. My motherboard has a maximum of 3.0, and for full speed the drive needs 4.0, which is why it runs at half the advertised speed. Where I looked - I don’t know, an ordinary white 980 at 3.0 pise can give the same speed. Well, made in China) This, as I understand it, is random, someone can get Korea, someone Malaysia, I hope there is no difference. In the stress test, it didn’t heat up in any way, I don’t

Its pros: For many years I have been using the "pro" line of drives from samsung, there are no complaints about the work. Everything is stable and predictable. Some cons: Transition from MLC to TLC. However, apart from theoretically less durability, no minuses were found.

Here are the dimensions of the elements on the board: Controller: 17x17 mm DRAM: 14x8mm NAND: 18x14mm (each chip) To level the surface, it is necessary to use different thicknesses of thermal pads: 0.5 (for NAND) and 1.0 mm (on DRAM and Controller). In principle, you can save a little and put it only on the controller, since NAND works fine if it heats up. The latest version of HWiNFO64 shows not two, but three sensors on the 980 Pro. The third heats up the most (probably this is the…