Straight Coaxial Adapter Connector Eifagur Review

If you want to experience optimal audio and video quality, try this Straight Coaxial Adapter Connector from Eifagur. As a result of my tests, I determined that this connector is the perfect solution for getting the best signal transfer between any two coaxial cables. Its solid and durable build ensures it will last for a long time. This adapter is reliable, affordable, and very easy to install. The only con is that it may not be compatible with all types of audio and video electronics. Overall,

Fits LMR 240 easily. They took solder well. Firmly crimped. No other problems. Weather protection with silicone rubber band. I don't have test equipment to test the connector's impedance, but the overall SWR measurement with a dummy 50 ohm load at 440MHz is 1:1 to 1. The threads were cut correctly, the insulator remained intact at the soldering temperature . The plug does what I wanted with 100 watts.

I noticed on the first two fittings I used that the plastic sleeve that holds the center pin did not reach the end of the fitting. Look at the underside of the fitting from the end of the cable and you'll see that there isn't much thickness there. The first two fittings showed a short to braid after I soldered the center pin. I found that I had to trim the outer insulation cover more and then leave the inner dielectric insulation in contact with the center plastic sleeve that held the center…