I bought it for 690, at first I connected it in repeater mode to Wi-Fi with open access, it worked tolerably, but the connection disappeared every few hours, I flashed it for English firmware - it began to work in this mode. I spent a couple of days to my wire - I changed the English firmware to the 2022 extreme, reset the settings - with a channel of 150 Mbps ~ 98 Mbps by wire, 60 Mbps by wifi. In general, it's ok, but I was expecting a higher speed over wifi. And the connection is now stable…

I use the Internet through a Beeline VPN, I set it up quickly. The adapter has been constantly plugged into the network for 3 months and does not heat up. If you turn it off, then after turning it on, you need to wait 1 minute. until the connection with the server is established, the same if you change the settings and restart the adapter. I didn’t download the new firmware, I don’t see the point and it works stably. There are several firmware options on the manufacturer's website, maybe…

I bought this router model for my office. The price was very surprising. The case is made of sufficient quality, the antennas hold well and reliably. The menu is simple and it is very easy to figure it out there, and the firmware is installed without any problems. There are also no problems with communication, it keeps it very well. The price, quality and functionality of this product fully justifies its recovery. I am satisfied.

I’ll supplement my review, I’ve already smoked 2 such routers - for myself and my family, everything works well, there are no problems (I’ve been using it for more than 2 years) they dissuaded me in the store, they scared me that the network was constantly interrupted and generally a bad router and I had to take a little more expensive, in fact it turned out that installed and forgot))) I advise everyone

Looks neat and takes up little space. I connected, registered a login-password for the Internet and an L2TP server, and everything immediately worked. I don’t see any point in buying a router from beeline (smart box), which costs 2.5 times more expensive)) I specially went into the corridor (for 2 walls from the room where the router is located) to check if the speed drops - the speed remains the same.

I replaced the router from the provider without wi-fi with a router with fi-vi. I chose a cheaper model, read the info. I set up the Internet on my own, without anyone's help. All settings are clear and accessible. Didn't have to switch. The signal from the wi-fi is distributed throughout the apartment. There are no glitches with the simultaneous operation of 4-5 devices via Wi-Fi.

I needed WI-FI in the office, so I bought a router for this. It was made to last, durable, light as a feather, there are detailed instructions, so all the settings, including the password and prohibited sites (social networks), were set up by myself, it turned out to be not difficult. The signal is strong. In general, I am satisfied with the result, I do not regret my choice.

I liked it, set it once, set it up and forget it. Does not require reboots, the reboot time is fast, not 3 days like the DIR-300 that was before. Does not cut the speed on Wi-Fi, even more so on the wire. What else? . it’s good as a repeater, I have two of these routers, and one of these days I’ll get a third one . one is in one apartment and distributes a wafer from the wire and + 2 computers permanently, the second works as a repeater in the second apartment, distributing to two computer…

I bought it in Aliexpress for 990 and I am happy with the purchase: I sometimes rearrange it from place to place, and when you turn it off / on, all the configuration parameters do not fly off. So light that you can put it on your knees. The bridge connection works fine and without speed cuts (3 wooden walls and a distance of 12 meters to a public router from the PTLINE provider), while 2MBps is enough for 3 wifi devices for video on YouTube in 360 and 420 quality.

I was worried that there would not be enough signal strength for the whole apartment (3 rooms, 72 sq. M) But it catches everywhere and all devices - unlike the more expensive TP-link TL-WR740N - was not enough for the whole apartment, even a month later Wi- fi began to work only at point-blank range (although I see excellent reviews about it - apparently I was unlucky)

I bought this machine to replace the deceased Zyxel Keenetic Lite. Everything seems to be good, ated to the latest available firmware V5.07.63.1_ru. But also, as already mentioned here, I noticed a periodic increase in ping time. This is noticeable on Ip-Tv - the picture periodically freezes for a very short time, but it was especially unpleasant when using SIP telephony - audibility disappears for a couple of seconds, then it is restored again. Previously, this was not the case with…

Apparently my router is among those that do not work stably. I'm satisfied with the latest firmware 2022 63 in terms of functions. I need bridge mode - I connect a device to an existing Wi-Fi ethernet connection, good reception is important. In old firmware, the bridge was somehow poorly configured. Everything seems to work great, except for one thing. The router cannot work stably for a day. The connection falls off, everything is in a strange state, sometimes it’s even impossible to get to…