Description of Tent extreme double Tramp BIKE 2 V2, gray
Robust double ward from Tramp, suitable for year-round use on hikes of any length and complexity. The design and materials used make the model resistant to strong winds and other manifestations of bad weather. The presence of a skirt will not allow them to penetrate even along the bottom. In bad weather, for better protection, it is pressed down with snow, sand or other suitable material.
Characteristics:* Metal sliders were installed instead of the eyelets into which the arcs were inserted, the width of the sling was reduced to 10 mm* The awning is also attached to the arc using a metal slider* The tension is due to plastic buckles, in general the design is lightened and simplified* Supports in the ventilation windows Now they are not flexible, but rigid, which makes the window more stable in strong winds* The zone of the lower guys is reinforced with an additional stitching* For the upper guys there are special rubber rings that fix the guys in the folded state* The bag has acquired a classic look - a straight zipper, instead of a U-shaped one* Since 2018, an updated version of the tent has been released with minor design changes * The frame of the tent is 2 folding aluminum arcs of different sizes. After installing them, you get a product in the form of a half-barrel, with one entrance and a wedge-shaped vestibule. The maximum height of the tent is 1 m.* Like the other tramp models in this series, the bike 2 (v2) is equipped with 2 ventilation flaps. The level of their opening can be adjusted both from the outside and from the inside of the tent. The model consists of a sleeping compartment, to which the frame arcs are attached, and an outer awning. The latter, due to processing, is resistant to ultraviolet radiation, moisture and even fire - impregnation significantly slows down its spread through the fabric. All seams are taped for better protection.* The inner tent provides travelers with the highest possible comfort. The dense bottom will ensure dryness in the sleeping compartment even in heavy rain, the mesh at the entrance and windows will not let insects inside. In addition, inside there are pockets and a removable hanging shelf for storing various small items.* The tent weighs no more than 3 kg and fits in a compact case that can be put in a backpack or carried separately. Together with the awnings, the set includes pegs for fixing and detailed instructions for installation, disassembly and maintenance of the product.
Destination extremeNumber of seats 2Water resistance of the bottom 10000Water resistance of the awning 8000Windproof skirt YesNumber of entrances 1Number of vestibules 1 * 120 cmSize 350 * 120 * 130 cmSleeping place 230 * 120 cmMaterial 100% PolyesterTent material 100% polyester 75D/190 Number of layers 2Bottom material 100% polyester 75D/190TFrame material AluminumComplete with 3 -faced pegs, repair kit, braces.
Inner tent material 100% breathable polyester RipStopMosquito nets at the entrance to sleeping compartments
Hide