🚗 Enhanced Performance CARB Spacer by Trans-Dapt Review

While it's impossible to tell if it will work without a dyno, it got the job done i needed to include it in the air filter and carburetor above the manifold.

While it's impossible to tell if it will work without a dyno, it did the job it took me to lift over the air cleaner and carburetor manifold.

While it's impossible to tell if it will work without a dyno, it did the job I needed to overhaul the air cleaner and carburetor lift distributor. .

This is a little different from perfect hole alignment, but you can make it work (1 star downgrade). I used 2 1/4" spacers to make it 1.5". Also have a 1/8" steel rod to take the choke stem apart. Also be sure to check the kickdown (TV) cable to see if it needs to be straightened if you increase the spacing a bit. If you use thicker spacers , you will need a 5" bolt for the front (5/16), the rear bolts work fine. Noticeable performance gain as there is more air available in the intake manifold.