Vetroo AL600 Mid-Tower ATX PC Case With Top 360Mm Radiator Support, 3X120Mm ARGB Fans, 3X120Mm Regular Fans, Airflow Mesh Design In White For Enhanced Gaming, With Controller Hub Review

As the title suggests I expected a cheaper feeling case but was quite surprised by the quality of the case.When I received the product 6 out of the 9 required motherboard standoffs were pre-installed. I did have to play with the 3 standoffs I installed to get them square to the case prior to motherboard install - but all got installed and lined up with the holes.There was adequate space to route cables behind the motherboard and the final installation looked very clean.Quick tip I had to…

Overall - a great case for maximum air flow control.Likes - comes with its own rgb control hub. Comes with 6 fans (1 rear, 2 bottom, 3 led front). The bottom 2 fans sit over the power bank and HD slider. The filters for the case are held with magnetic strips, which is a new concept to me. There are plenty of cable guides and anchoring areas for a clean wiring.Dislikes - fans that come with thr case are very noisy. If you power the fans using the rgb hub, most fan control programs will not be…

Spent 10 hours trying to figure out why my pc wouldn't boot when I installed it in this case. I tried two different power supplies in the case ,no boot. After a day of trouble shooting; even buying extra chords for my power supply , I took it out of the case and surprise it worked. I liked the case desi

I absolutely love the color of this case! It matches well with the Razer Quartz pink. It was very easy to assemble the parts inside and I appreciate the preinstalled RGB fans and ARGB controller inside. The only thing I don’t like is the punch out holes for the graphics card. I wish it were screw out slides instead.

This is for my little girl. I'm building in it right now. The hinged door with magnetic clasp is so amazing. I really wish that the mesh front went down all the way so you could see all the fans though. I moved the bottom one to the back for that reason. The RGB fan hub is great. I think it's priced appropriately but it does feel cheap in a lot of places. Pop out style PCIE brackets are a bummer and the sucker has some sharp edges but it's gone together pretty good so far. There's some 3.5" HDD

Compared to the price of the case. it’s manufactured poorly with some of the cheapest most flimsy steel you can buy. Not to mentioned that because it’s manufactured and shipped from China none of the slot measurements were done correctly and are millimeters off. It sounds harmless but I am lucky to be able to just BARELY fit my USB cables in. The screws that came with the case are cheap and short, not to mention the measurements for the placement of each screw hole was also done poorly. For a…

pretty clean and classy case , if you like how the nzxt h510 looks but want a mesh front then this is the case to get , best bang per buck when its on sale , you can also fit 3 140mm fans in the front for airflow , would have liked it if there was mesh also at the bottom part of the front panel for more breathability. all in all this is a very clean/simple case and i recommend it.

The case is built well, and has a very nice tempered glass door, but my only peeve with it so far is that to install PCIe cards, the metal slot on the back of the case has to be broken off. Most cases have a design where you unscrew the slot so you can replace it later if the slot is open, but you can't do that with this case. Other than that, love the look, and was honestly surprised with the overall quality.

This is a lovely looking case and I especially love that the glass panel functions as a door and can be taken off easily if needed.The back has a lot of little places to secure wires to make cable management easier and two bigger plastic brackets to hold thicker bundles of cable but I actually ended up taking it off. They’re attached with a sticky adhesive so you don’t need to worry about damaging the case if you wanted to remove it.You can take off the front mesh panel of the case as well if…

The fans are fantastic, I bought 3 more to complete the setup and they aren’t loud at all yet keep the PC cool. Lovely RGB control, love the modes (I have it set to white). The hinge door is fantastic, love the easy access to internals. I would recommend corner covers because the corners are very sharp (I got clear jelly-like ones). Nice SSD holders too.

Let's face it, the only reason why we chose that case was the color. Otherwise, it would be a pretty OK case with a nice hinged glass pane. if it wasn't for the fire part. I've assembled many PCs, and it's the first time I see something burst into flames. A few seconds after connecting power, we saw the smoke: the SATA part of the provided cable that connects to the built-in cheap LED and fans driver board was obviously way too weak for even the modest load a few fans and lights take. We…

This tower is very easy to put together and looks great for its price. At first, I was missing a specific cord but only one call to their customer service fixed all the issues. They sent a replacement cable out immediately and I got it a day later. I was honestly very worried they wouldn’t help me at first, but the man I spoke to was nothing but kind. I really love this purchase!

In general, the case was great and was almost exactly what I was looking for. My customer was thrilled with it, the fans which came with it are solid without being heavy and the RGB lighting is nice. It came with its own internal RGB controller which was very easy to plug into and was already mounted inside the case. My biggest issue was on the back of the graphics card. As you can see in the pictures I uploaded the slots don't have the standard sliding cover. It's a screw-on cover but there…

My wife loves this case, looks fantastic, very spacious and easy to work with, with many options available here. My only complaints are the headache that’s the onboard controller no instructions whatsoever on what’s to go where. Ended up buying a 3rd party rgb controller that was much simpler to use. The only other complaint is the thinness of the metal, it will bend when you don’t mean it to so be careful.

This is one of the best cases I've built in. There is plenty of room for cable management in the back and the tubing helps with tidying it all up. The pre-installed fans are okay, but I replaced them with my corsair ones so I don't have to use two different rgb softwares. The design of the case is great for airflow. Currently have the fans as front and side intake, top and rear exhaust.

Easy to instal mb board and it lights up. Just need to wait and see if it works with the software to change the lighting Thanks for attention!

I had an easy time building in this case only thing i didn't like is that the PSU basement is non removable and the power button little iffy but can always replace other than that it has been a good case.

4 stars ONLY because the expansion slot covers are the type you snap off rather than the more common type that can be removed and replaced. Just a very minor annoyance in an otherwise great case.

Spacious, but not very well designed. The back won’t shut properly if you have a lot of wires and one of the case slots for the graphics card will be blocked by the motherboard so you can’t pop it out.It’s a functional case otherwise and I do like it. I’d recommend something else unless you really want the color choices available, however.

Look this case normally runs 69.99-89.99 at 100$+ don’t even buy this case got that it’s just not worth the cost fans run to loud for a100$+ case also had a dumb hub. It’s just a very poor choice