📺 WALI TVS002 Universal TV Stand Table Top for LCD Flat Screen TV, 23-42 inch, VESA 200x400mm Review

I bought this for a 32 inch Samsung Q50R TV because the standard legs were too far apart for my installation location. This is a great stand replacement. Feels very durable and all steel. The instructions could be better but if you are a logical person it will make sense just take your time with it. The spacers definitely came in handy, and it ended up taking me about 15 minutes to set everything up properly. I am satisfied with the result, the TV is not at all afraid of fluctuations. It's…

very satisfied! Feels very strong. I went with the smaller version despite my 43" TV because I wanted the legs to look really short. Comes with all the screws, washers and gaskets you need for your TV (every TV is different, hence all options are included)! The only thing I can't seem to get right are the plastic foot caps that cover the screws, but you still never see the sides where my TV is.For the price, it seems pretty Can't be beat, glad I chose this option for my online exchange site…

I ordered the smaller 23-42" because my Sansui is 40". The Sansui's mounting holes are relatively high up on the TV. I stretched those legs out as far as I could and only got about 4 1/2 inches of travel off the table, about 3 1/2 inches from the legs that came with the TV. So I paid for an extra 3 1/2 inch TV height. Not what I really needed, but better than nothing. I think a higher setting for larger TVs will give you more lift off the tabletop. This is a very well made stand. And the…

perfect perfect perfect. I used it to elevate my 40" Vizio which I use as a monitor. I'm a tall guy so Vizio's standard 2" stand was too low. I knew I needed an expensive TV stand and didn't want that spend a lot so this was perfect. Very stable. Just make sure the longest part of the foot is FRONT. This is where I think people have issues with stability or wobble. Can't say enough, how great the quality is no alignment or misalignment issues perfectly machined metal clips with no burrs or…

I bought and used this for a 39 inch Magnavox LED backlit LCD TV that was previously wall mounted and no longer had a stand. I assembled a lot of furniture - bookshelves, tables, filing cabinets - you name it. Myself. It was funny. The instructions were only visual and poorly done. There's a lot of hardware included, which makes sense given it's available for your particular TV, but it's not. explained until you get to these steps. Then when I use smaller screws like my TV requires, the washers

Excellent product. Thoughtful design made of heavy steel. Much better than the original stand that came with my 32" Sony. They seem to have thought of everything, including non-slip feet and the ability to tilt the TV forwards or backwards without tilting the base. It seems to me that it would be difficult to knock the TV over unless it was mounted high on vertical supports. My only complaint is with the instructions and not the product itself. Although all components are clearly labeled L or…

This product doesn't cost that much money so not too much that it doesn't work as I hoped. But I recommend you look elsewhere for other products based on my experience detailed below. The product arrived in a crumpled and taped box. It had a sticker on it saying Revane had reused it. When I opened the box, half of the hardware pockets were open and empty, including the gasket pocket where the brackets connect to the back of the TV. I wasn't keen on this, but I really needed a TV stand, so I got

After buying a tv in an open box from one of my local big box stores cheap I found the legs were missing and there were no replacements my 19 inch TV. So I looked at a few universal coasters and settled on this one, which was one of the cheapest coasters on the site. I would recommend and buy again in a similar situation. Advantages: - Easy assembly. Took me about 10 minutes for the footrest and another 5 minutes for the TV mount. Continuous. holds the TV in place with no issues - Comes with a…

I read some reviews and took to heart the recommendation to pay close attention to the drawings. I made another mistake the first time and had to reinstall the A4 and B4 parts. The TV I recently bought was a LG 28 inch (Family). This means that its diagonal is only 27.5 inches, but apparently it is 28 inches. So the panel itself is 15x25. The highest VESA hole is 6 1/4 from the top. Now I don't have to worry about kids or cats who like to jump and climb. Mine are all older and don't want to…