Waterproof 4" Flood Beam LED Work Light Bar Set With 18W CREE Chips - Ideal For Off-Road Vehicles, SUVs, ATVs, Jeeps, And Boats Review

Whoever is listening to this it doesn’t seem like I’m talking to the right person these lights right here one came I put it on and the bracket snapped should not it’s cast pot metal I have a clip the wiring harness they were going to send me another wiring harness they did not what I need now are two brackets that go on the light whoever is reading this please send me two brackets that go onto the lights or play

I mounted them 'upside down' from the position shown. The mounting bracket does not accommodate that method of mounting while keeping the cable entry on the bottom, so I suspect I will have issues with water ingress. Mounted that way does not allow the light to be rotated down. The wiring harness did not have a wiring diagram showing how the switch and relay are wired, so if you are not using the supplied switch, you have to figure out how it is wired yourself. No connector was supplied for the

The lamps themselves are great - very bright and extremely uniform over a very wide area. I mounted them on the rollover bar on a lawnmower (sometimes I need to finish mowing as it gets dark). The wiring kit was a disappointment. The picture showed a cable mounted switch, but it came with a panel mounted switch so I had to drill a hole and mount it very differently than I had planned. And the spade-type wiring connectors on different portions of the wiring harness didn't match on one of the…

After unboxing and looking over the components, why are the mounts so wide? I would understand if there were rubber spacers to reduce vibration, but there is nothing of the sort in the box. And with that said, the bolts that come to mount to the light are very short and would never reach through spacers. A good 3/8" gap that 3/16" worth of screw is supposed to pull together.The lights themselves may be ok, haven't turned them on yet. But glass lenses would certainly be an improvement over the…

Great lights,very bright, installed them on my tractor and they can take a beating! Only bad is that the connecting wires for the distance of the lights needs to be longer.

The problem I had with this is that the light itself is that correct measurements but it's a little larger than and has a rounded edges so won't fit and the place that I wanted a mounted on my truck darn is nice and bright

Installed two on my ATV so I could see where I was going. The lights work well and seem to be well built. Time will tell how waterproof they are. The other two are going on the tractor.

Recieved them and the mounts are NOT what is shown in the pictures, there are not 2 set screws shown to attach the mount ro the light it came with one small bolt that does not work have to go find something to work so I can actually mount these.

Got them mounted, but they're not wired yet, since I have to run power from the front of our RV to the back. Nice mounting system, and a good amount of adjustability.

These bright lights were installed in the engine room of our 40' Trawler. They bring the darkness of the space to light for engine repairs or anything that my need tending in the engine room.

The lights were easy to install. So far they seem really bright for such a small light. Have not used them at night, but the yellow led light really shows during the day. The wires were just long enough to mount them and reach the headlight without adding any additional wires.

Easy to install and very universal for so many different applications and supper bright ! There installed on my home use golf cart and dose not effect the battery charge at all

The mounting system was flimsy, not bright enough for my needs, but did have a good wiring harness. I took them off and replaced them with a heavier built 25W unit for 3 times the money and well worth it.

Terrible mounting system for the lights bought got the Nilights to replace the others.The wiring harness and switch are excellent

You would think the lights would connect with the switch provided NOPE I had to cut the wire and connect myself. The lights are good quality but the range of motion on the brackets were limited. I did mount them upside down so that was my frustration

Just great! Super bright. Mounts are a little limited for application but with a separate homemade bracket can be put most anywhere. Will be getting more of these.

Fit good on my bull bar without covering up the front tag. Wiring was nice and easy to install. I like the switch also. They are not a very sturdy light but for the price you really cant complain. 18 watts is not real bright so if you need a lot of light step up to something with more wattage. Overall a decent item.

Have had these on my Jeep for over 2 years. Thanks for attention! No problems and bright enough for corner lights for night trail riding.

The bracket did not fit on the hitch of a 2004 dodge ram like another reviewed had said but I was able to mount them under the bumper which was a better spot anyway. Great product regardless.

Immediately disappointed at the light output. Sutiable for general, illunimation needs, e.g. work lamp. I do not know how anyone would be able to use this for driving. The beam is too wide, with the fixture's output, to have significant reach.