Wathai Pcl Slot Fan 90mm 92mm Fans Brushless Cooling Fan - Ideal for Cooler VGA Graphic Card Review

Ordered this to help my GPU. First, he has no style. a kind of throwback to the 80s. Second, it's very flimsy and cheaply made (the block came bent on the mount and can wobble even when bolted on), the 3rd only works for me on high. a little less didn't seem to make a difference. Noise is minimal and connections are direct. Without a fresh air inlet, it is probably nothing more than the circulation of the heated housing air. In general it works, but it certainly may need a refurbishment. an…

I bought a dual fan setup for my NZXT h500i case. I bought a zotec 3090 but the card got hot up to 75-77 degrees Celsius which caused the card to remain at a very low clock speed of less than 1700MHz. I installed and connected this fan under the card. The 1st test pleasure was the same and very disappointing. I then set the constant fan speed on the Zotec card to 70% (still quiet) all the time to pull in more air. The next run showed that temperatures in the 64-67 range exceed 1800 MHz in most…

Cool little product. Really easy to install. I wish it had a PCI interface. There are only 3,120 fans combined. So it sags very easily. I run power for my GPU underneath and up to the right corner of my card and the cables help hold the back of the machine. A simple solution. It's also worth noting that while the fans are cleared at the top, they should ideally be mounted below your GPU. You can also remove the mounting bracket and flip it over so the fans blow air onto your card. I did this…

I bought this bad boy to cool the onboard memory of my aio cooled GPU. From the factory, my kit only has tiny heatsinks to stick on memory chips to keep them warm. So I added this extra cooler. It works out ? Yes and no . If I wanted to see a noticeable temperature drop I would have to overclock these little fans to 100! And they whine a little when you increase the speed from 1000 to 1100 rpm. So a trade-off between noise tolerance and fan speed gives me 5 to 8 degrees above memory temp. For a