Well pump DAB DIVERTRON 1000 M (650 W) Review

This pump was purchased to raise water from a well. A water pipe was laid on the site, and an input to the house was also made. DAB 1000 is convenient in that I connected it to the water pipe with a 1" hose, lowered it into the well, plugged the plug into the socket and forgot about it. If you need water, the pump turns on when you open the tap. The pump is not critical to the flow of water through it, you are calm regulate the force of water pressure with a tap at the outlet. After closing the

I installed it in a well 5 m deep with wiring to the bathhouse and the house about 30 meters to each and forgot about it. Everyone writes that it is sensitive to voltage drops, my voltage constantly jumps like that, but there are no problems. An excellent pump and protection against dry running, there is also a check valve. In winter, I use it periodically and don’t get it out of the well, there’s no drain valve and nothing freezes. This year, the temperature reached -30 at night and at least…

There are two of them, one 1200 for a house and a bathhouse and this one for irrigation. One is still working and has been for 7 years. This miracle rarely worked and burned out irrevocably, the reason for the ingress of water into the control board and the engine, the repair price is 15-16+ 1 diagnostics. They say the gasket was jammed due to sand getting in, they lie, it hung so that there were 5 more rings to the bottom, a well of 14 rings, what kind of sand is in the middle of the well, I…

Basically, there is nothing to complain about. He worked honestly for 3 years, more precisely 3 seasons for 6 months each. Operation is intensive (watering the lawn, building a house, domestic needs). I didn’t get it out of the well for the winter (an experiment was conducted for how long the pump would last without maintenance and discounts). Case history: At first, the RCD on the pump line began to work. The plug on the side of the pump was disassembled, as it turned out, the sealing cuff…

I have been using it for 5 years, it has 15 rings in the well, it has excellent pressure of about 2 bar. There was a problem with it, it stopped working. I bought a new one, it worked for a week, it broke down, I took it to the service center, they said that the water got into it can not be repaired. There was nothing to do, dismantled the old one, cleaned the pump part and it worked, it has been working for 5 years.

Well, what can I say. It's just an awesome pump. Worked for a year without a hitch. The pressure of 3 ATM keeps stable. I added a hydraulic accumulator and pressure surges were no longer felt. I recommend to buy. The only drawback I think is the price. But he's worth it.

At the moment the rinse was hanging in the washing machine, he pumped out three rings of water in two hours, and accordingly there was an empty intake, although it was immediately noticed that it was not protected from overheating.

Conclusion. For the conditions of our garden partnerships, where tension jumps, such bells and whistles are not needed. For those who decide to buy this miracle pump, I recommend installing it only with a voltage stabilizer. For its current price, now I would rather assemble a conventional system, a separate pump, a separate hydraulic accumulator, a separate automation

I was flattered by positive reviews and an expensive price, which guarantees reliability. The unit didn't work. It would be better if I assembled a circuit on a cheap Chinese - and let it burn once every six months, but for four times less money. Pros: All in one Set and forget Powerful, quiet, adapts to water consumption (chastotnik) Some cons: The manufacturer recommends no more than 20 on-off switches per hour (A washing machine at a 40-minute wash already exceeds this figure. Burned out…

The pump was operated in a well 3.5 m deep, completely submerged in water, the length of the route was 20 m, power was supplied through a 2 kW stabilizer. Used to supply a house with two pensioners (3 parsing points). He died after 2 months with a diagnosis of "Water flooding through the shaft seal. Malfunction of the motor and electronic board. " DIVERTRON 1000M 650W Q5.7.

Its pros: Full automatic. But I installed an expansion tank of 24 liters. Reduces the number of starts at low water consumption, prolongs the resource. Got cons: He died in the 6th season in the country. Most likely the gaskets are leaking. Now the price is outrageous.

Opened the faucet - water flows, closed - does not flow. No extra bells and whistles, just a pump and water distribution, everything is full automatic. I walked around it for a long time and licked my lips until I waited for the price to go up. However, I still bought it, which I am extremely pleased with.

Bought on advertising and rating! I suffer the second year! Installation was done by a specialized organization, all according to all the rules! Worked well for a month! Then: open the faucet, the water flows with a minute delay or does not flow at all! You have to flip the introductory machine all the time! I thought maybe because of the low voltage in the network, I put a stabilizer, it didn’t help! It would be better to buy: an ordinary submersible pump + pressure switch and a hydraulic…

There was a need to replace the pumping station and install the pump in the well without connecting a separate machine that works to achieve the desired pressure, since I did not want to lay a cable from home. Electricity was already connected to the well, but not from the house. An excellent solution for such cases. Additionally, only a hydraulic accumulator was installed.