Header banner
Revain logoHome Page
🔥 whizzotech solder wire 60/40 tin/lead with flux rosin core - 0.032 inch diameter for electrical soldering (4oz/100g/0.22lb) logo

🔥 Whizzotech Solder Wire 60/40 Tin/Lead with Flux Rosin Core - 0.032 Inch Diameter for Electrical Soldering (4oz/100g/0.22lb) Review

13

·

Very good

Revainrating 5 out of 5  
Rating 
4.8
🔨 Welding Tools, 🔧 Automotive Tools & Equipment

View on AmazonView on ЯM

Media

(4)
img 1 attached to 🔥 Whizzotech Solder Wire 60/40 Tin/Lead with Flux Rosin Core - 0.032 Inch Diameter for Electrical Soldering (4oz/100g/0.22lb)
img 2 attached to 🔥 Whizzotech Solder Wire 60/40 Tin/Lead with Flux Rosin Core - 0.032 Inch Diameter for Electrical Soldering (4oz/100g/0.22lb)
img 3 attached to 🔥 Whizzotech Solder Wire 60/40 Tin/Lead with Flux Rosin Core - 0.032 Inch Diameter for Electrical Soldering (4oz/100g/0.22lb)
img 4 attached to 🔥 Whizzotech Solder Wire 60/40 Tin/Lead with Flux Rosin Core - 0.032 Inch Diameter for Electrical Soldering (4oz/100g/0.22lb)

Description of 🔥 Whizzotech Solder Wire 60/40 Tin/Lead with Flux Rosin Core - 0.032 Inch Diameter for Electrical Soldering (4oz/100g/0.22lb)

Characteristics of the Whizzotech Solder Wire 60/40 Tin/Lead Sn60Pb40

When it comes to electrical soldering, the Whizzotech Solder Wire 60/40 Tin/Lead Sn60Pb40 with Flux Rosin Core is a top-notch product that stands out from the competition. With its alloy content of Tin 60%-Pb 40% (Sn60Pb40) and Flux 1.7%, this solder wire offers exceptional performance and reliability.

One of the key characteristics of this solder wire is its high-quality rosin core, which ensures optimal soldering results. The wire's antioxidant properties contribute to its long-lasting effectiveness, while its excellent weldability makes it a preferred choice for both professionals and DIY enthusiasts.

What sets this solder wire apart is its quick and clean melting process, allowing for efficient and precise soldering. Its smooth flow further enhances the soldering experience, ensuring seamless joints and connections. With a low melting point of 370°F, this solder wire enables safe and effective soldering without damaging sensitive electronic components.

Similar Products in the Welding Tools Category

While the Whizzotech Solder Wire 60/40 Tin/Lead Sn60Pb40 is undoubtedly an exceptional choice for electrical soldering, it's always helpful to explore other options in the market. Here are a few similar products worth considering:

  • Whizzotech Solder Wire 63/37 Tin/Lead Sn63Pb37: This solder wire offers a slightly different alloy content with a higher percentage of tin. It provides excellent conductivity and a strong bond, making it suitable for various soldering applications.
  • ABC Electronics Solder Wire 60/40 Tin/Lead: Another popular choice, this solder wire features a similar composition and core flux. It ensures reliable soldering performance and is widely used in the electronics industry.
  • SuperSolder Solder Wire 60/40 Rosin Core: This solder wire boasts a high-quality rosin core and a balanced Tin/Lead ratio. It offers excellent flow characteristics and is suitable for both electrical and general soldering tasks.

    • Problems Solved and Who Will Benefit

    The Whizzotech Solder Wire 60/40 Tin/Lead Sn60Pb40 addresses several key challenges encountered in the field of electrical soldering. By providing a reliable and efficient solution, it greatly enhances the soldering process for professionals, hobbyists, and DIY enthusiasts alike.

    One of the significant problems this solder wire solves is the need for a soldering material with excellent antioxidant properties. With its long-lasting effectiveness, it ensures reliable connections and reduces the risk of future malfunctions. Additionally, its quick melting and clean flow characteristics save time and effort during soldering tasks, resulting in improved productivity.

    Professionals in the electronics industry, including technicians, engineers, and manufacturers, will greatly benefit from the Whizzotech Solder Wire 60/40 Tin/Lead Sn60Pb40. It is also an invaluable tool for hobbyists and DIY enthusiasts working on various electronic projects, such as circuit board assembly, repairs, or modifications.

    Overall, this solder wire's exceptional characteristics and performance make it an indispensable asset in the world of electrical soldering, empowering users to achieve precise and reliable soldering results.

    Tin Lead solder wire alloy content, Tin 60%-Pb 40% (Sn60Pb40), Flux 1.7%. High quality rosin core solder wire. The Soldering Wire has antioxidant for a long time and good weldability, melts quick and clean, flows smooth. Good soldering kit for electrical soldering. Low Melting Point, 370°F. Weight, 4oz (100g). Diameter, 0.032 In (0.8 mm). Solder Wire Length: 100ft.

    Hide

    Reviews

    Global ratings 13
    • 5
      11
    • 4
      2
    • 3
      0
    • 2
      0
    • 1
      0

    Type of review

    Revainrating 5 out of 5

    Works as intended Good for welding and soldering

    Used to replace a broken power connector on an Asus K53E. It melts quickly and welds well to the motherboard connectors. The small diameter made it more user friendly.

    Pros
    • This is great
    Cons
    • Expensive

    Revainrating 5 out of 5

    I like this solder very much on soldering equipment

    Bad solder only. I have tried many different brands and the only two I will review are the Wizzotech and MGChem brands. It flows very well and hardly causes any spikes or problems.

    Pros
    • Lots of positive emotions
    Cons
    • Expensive

    Revainrating 5 out of 5

    A good thing. in welding and soldering

    I am new to soldering electronic parts. I tried using a similar solder from Rodeo Shake and made a mess. The first soldering with it was perfect. IMHO great soldering.

    Pros
    • Price
    Cons
    • Not bad

    Revainrating 5 out of 5

    Excellent lot. Excellent price.

    Bought for wiring guitars. This lot works as it should. This fine solder melts easily and flows well. Plus, it's cheaper than buying it at my friendly national hardware store chain in my neighborhood hometown.

    Pros
    • GOLS certified
    Cons
    • Hard to tell

    Revainrating 4 out of 5

    Buy it. You will not regret it.

    This is my commercial product solder. I've been using it for many years. Works exactly as it should. Always produces good, clean solder. It's not the cheapest solder, but it's one of the best.

    Pros
    • great product
    Cons
    • cable is shorter than other picks

    Revainrating 5 out of 5

    Did the job - Welding and Soldering

    My friend bent one of the CF card slot handles in my Nikon D700 so I had to buy a new card slot to put it in. This solder did a great job of bonding the new part's contacts to my camera's main circuit board. now i can use my D700 again :D

    Pros
    • Dope 🔥
    Cons
    • 0

    Revainrating 5 out of 5

    Decent rosin based solder

    If you are looking for this item then you probably know exactly what you are looking for and what you need. Okay, this solder is perfect for soldering small electronics. I mean for such simple things, 5 stars for doing exactly what it says

    Pros
    • Alright!
    Cons
    • Damaged

    Revainrating 4 out of 5

    Excellent value for money, best solder

    It comes in a huge roll which is great and melts very well at around 400c. I like the small diameter because it's easy to solder PCBs and drones. A youtube video recommended this solder and for all my uses it is the only type of solder I will ever need. 5 Stars.

    Pros
    • Certified
    Cons
    • I won't tell

    Revainrating 5 out of 5

    I love this stuff - soldering and soldering supplies

    I'm giving this 4 stars instead of 5 just because people have a hard time trusting 5 star reviews and therefore rarely read them. That thing impressed me! Here's what I know so far. The drop I let cool on my iron tip started to melt at around 210°C (I slowly increased the temperature). Test solder on the attached photo at 300°C with clean surfaces and no additional flux. Contrary to some reviews, the roller I received had flux in the core (which is clearly visible in the photo) and wet the…

    Pros
    • Durable finish
    Cons
    • Zero

    Revainrating 5 out of 5

    Did the job well for low melting point

    My friend bent one of the CF card slot handles on my Nikon D700 so I had to buy a new card slot to fit it. This solder did a great job of bonding the new part's contacts to my camera's main circuit board. now i can use my D700 again :D

    Pros
    • soldering and soldering equipment, 370℉. Weight 4 ounces (100g). Diameter, 0.032 inch (0.8 mm)
    Cons
    • Not sure

    Revainrating 5 out of 5

    Decent Rosin Core Solder

    If you are looking for this item chances are you will find it know exactly what you are looking for and what you need. Okay, this solder is perfect for soldering small electronics. I mean for such simple things, 5 stars for doing exactly what it says

    Pros
    • Tin-Lead Solder Wire Content, Tin 60% - Pb 40% (Sn60Pb40), Flux 1.7%
    Cons
    • Can't remember but there was something

    Revainrating 5 out of 5

    High quality soldering and soldering accessories

    It comes in a large coil that fits perfectly and melts very well at around 400°C. I like the small diameter because it's easy to solder PCBs and drones. A youtube video recommended this solder and for all my uses it is the only type of solder I will ever need. 5 Stars.

    Pros
    • High quality solder wire with resin core. The soldering wire has long anti-oxidation effect and good weldability, melts off quickly and cleanly, flows smoothly
    Cons
    • Long delivery time

    Revainrating 5 out of 5

    Good solder for electronics, not just on copper if needed.

    I am picky about my solder and have worked with many brands of junk. I finally came across this brand, which isn't as good as the good old radio shop or the tenma brand of yesteryear, but very close. This solder is well wetted and distributed. It doesn't have a ridiculously high melting point, but it's high enough not to break down on hot components. It doesn't oxidize too quickly and has a well-distributed amount of flux throughout the roll, leaving all solder joints looking bright and shiny…

    Pros
    • Solder Wire Length: 100 feet
    Cons
    • Small Parts