🚪 Enhance Your Space with WINSOON Straight Design Sliding Hardware Review

The screws holding the bracket to my 1.5 inch thick door were too long. They were over 2.5 inches long. I had to go to Low and spend $5 to get shorter studs. The instructions do not indicate the difference between washers/spacers. or label parts correctly. The measurements you use to mark and drill are not common. For example, the 7/16" bit is a custom size and wasn't in my RYObi, Dewalt, or Milwaukee bit set, I had to borrow it from a neighbor. Also, the door is marked 1. -9/16 in. and 3…

The screws holding the bracket to my 1.5 inch thick door were too long. They were over 2.5 inches long. I had to go to Low and spend $5 to get shorter studs. The instructions do not indicate the difference between washers/spacers. or label parts correctly. The measurements you use to mark and drill are not common. For example, the 7/16" bit is a custom size and wasn't in my RYObi, Dewalt, or Milwaukee bit set, I had to borrow it from a neighbor. Also, the door is marked 1. -9/16 in. and 3…

It was installed above a pantry in a hallway where a swinging door is not ideal. We are enthusiastic about the quality and the smooth process. The solid handle is a big plus. Installation was easy. Some skill is required to reach its level and even. Double check all measurements with equipment as I remember one of the instruction steps was inaccurate. We also included an optional soft close mechanism that makes door movement more comfortable on both sides. The door we used was HD's Jeld-Wen…

I am very happy with my purchase. This hardware was very easy to install, except for that moment, halfway through assembly, I realized the bolts were too long to attach the hangers to the door. COMPLETELY MY FAULT! I completely misunderstood depth. I have no idea how I did it, but I really liked the door (and holes already drilled) so I contacted the seller and got an immediate response. Not only did I get a quick response, the seller also sent new screws right away. how awesome is that…

I used 80 year old pine boards that I pulled from our cottage before we tore it down and built a new house. The look we wanted was perfect for my wife's sewing room in our basement. The instructions were pretty good and the packaging of all the parts and pieces was excellent. Nothing scratched or damaged. I would give 5 stars but there is one downside. Plastic drywall anchors for anchor bolts didn't do the job. They came loose as soon as I put pressure on them as I was screwing them in. I ended

Hardware Kit is easy to assemble and install but requires 2 people. I bought the 9ft version which has 2 x 4.5ft sections. The connection between the two bars is weak and will shift when you lift it. The bars are usually drilled leaving 1 more hole for the lag bolt and gasket than they send you. Additional details are available. This is a powerful mount. This door is 200# solid red oak. Because the cleat holes in this and most other kits on the market are pre-drilled, they are almost never…

I'm a contractor. I have already installed front doors. I had no problems. This product, like many others these days, demonstrates the fact that the people making it have no idea how it is actually used. First, anyone involved with doors should know that here in the US, most interior doors, whether solid or hollow, are 1 3/8 inches thick. Most exterior doors are 1 3/4 inches thick. There are all sorts of exceptions to these sizes, but in most cases typical doors are found. The problem is that…

It seems to be made of decent materials but poorly finished. Leaves a lot of room for installation errors. Not to mention that the very first measurement in the instructions is wrong! Glad we caught it before we ruined our custom made solid poplar door by drilling a hole in the wrong place! The track clutch is loose and difficult to align, it would be much better if it was machined. The rail is pre-drilled on 16" centers. In a perfect world this works great BUT in a typical wall mount the pins…