📏 Calibration
3 Review
Perfect for machinists and metalworkers; measure angles with maximum precision. Workshop-grade set features 12 individual steel blocks of various angles. Includes 1/4, 1/2, 1, 2, 3, 4, 5, 10, 15, 20, 25, and 30-degree hardened-steel blocks. Perfect for setting milling angles or calibrating measuring equipment. Hard-shelled carrying case keeps the blocks…
Read more about this product
3 Review
Grade AS-1 gage block supplied with a Mitutoyo certificate of inspection that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. High-carbon, high-chrome steel provides high hardness and wear-resistance. Rectangular base for accurate wringing. Nominal length (in…
Read more about this product
3 Review
It is very important to keep your scale accurate to keep your measurements accurate. Us the Truweigh 200 gram calibration weight to make sure you have the correct calibration weights for scales that you use every day. No more errors, your scale will always precise with the Truweigh calibrator weight. Good material and workmanship: steel construction of…
Read more about this product
3 Review
Our Part # ALL-55525. Heat treated and case hardened to HRC 57-62. Made of precision-grade tool steel hardened and ground on all 6 sides of block. Accuracy and squareness on all sides within .0001"-.0002". Dimensions- 1" x 2" x 3", 3.5 lbs. weight.
3 Review
Grade AS-1 gage block supplied with a Mitutoyo certificate of inspection that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. High-carbon, high-chrome steel provides high hardness and wear-resistance. Rectangular base for accurate wringing. Nominal length in…
Read more about this product
3 Review
Size (L x W x H)2.50 x 2.75 x 2.00"; Capacity Round 2". Capacity Square 1-7/16"; Clamps are included. Stepped groove construction. 90 degrees V groove accuracy are central, parallel and square with all surfaces within 0.0003".
3 Review
Compatible with ELEGOO Mars series 3D printers including Mars 2, Mars 3. With length and width of 146*195mm and thickness of 0.127mm. 95% light transmittance, high-temp resistant and less release tension. The longevity is 50% longer than the regular version of release film and the frequency of releases can be up to 90000 times. Thicker packaging with…
Read more about this product
3 Review
This matched pair of blocks is ground to tolerances of .0001". 23 holes, 5 tapped 3/8"-16 TPI and 18 plain. Precision ground and case hardened on all six sides. Squareness of all sides is within .0002 per inch. Used for set-up, layout and inspection jobs.
3 Review
The machinist bench block is a handy tool for holding work when driving pins, drilling, etc.;. Made from steel hardened and ground. Ground holes size from 1/8" to 5/8" (3-16mm) diameter. The knurled side provides an excellent gripping surface; V-groove across the face accommodates round and odd-shaped stock. Diameter: 3". Height: 1-1/2"
3 Review
High Precision: +/- 20 Seconds, 0.0001" per inch. Set contains two angle blocks: one 30°-60°-90° degree block and one 45°-45°-90° degree block. Precision Ground Solid Hardened Steel. Thickness 0.25".
3 Review
Class: OIML Class M2. Milligram Weights: 50mg, 20mg, 10mg. Gram Weights: 50g, 2x20g, 10g, 5g, 2x2g, 1g. Multiple calibration weight sizes for your convenience when needed. Appropriate for all kind of measurements general laboratory, commercial or educational.
3 Review
Hardened & ground steel angle block set for machinists. Precision ground angles for setup in tooling, production and inspection. Four holes 11/32" for easy mounting. Accuracy: ±10 minutes. Dimension: (30°, 60°, 90°) and (45°, 45°, 90°).
3 Review
Made of precision-grade tool steel hardened and ground on all 6 sides of block. Heat treated and case hardened to HRC 57-62. Accuracy and squareness on all sides within .0002". Dimensions- 2"x 4"x 6". Cross drilling design allows for efficient use of lower weight with maximum strength.
3 Review
Contains Multiple Precision Weights: 1 x 100g, 1 x 50g, 2 x 20g, 1 x 10g, 1 x 5g, 2x2g, 1x 1g, 1x500mg, 2x200mg, 1 x 100mg, 1 x 50mg, 2 x 20mg, 1 x 10mg. Elaborate And Extreme Precision: Compared with the NIST-traceable calibration weights no appreciable difference in accuracy.(Permissible Error: +/-0.003gv). Stainless Steel Anti-Oxidation: These…
Read more about this product
3 Review
Provides easy and safe measurements of current and voltage from two or three wire outlets. Plugging the power connector into the line splitter separates the hot/live conductor from the neutral (and ground) for accurate current measurement. Dual ranges (x1 and x10) for higher resolution on low-amperage readings. Built-in recessed voltage testing inputs.
3 Review
Hardened and precision Ground on all 6 sides of each block. Accuracy with squareness on all sides within .0002" per inch. 23 holes consists of 5 tapped holes that are 3/8"-16 for clamping and 18 untapped holes. Cross drilling design gives minimum weight and maximum strength.
3 Review
Use with your FLIR MR77, MR160 and MR176. 4.5 and 6.5 inch pin depth. Durable Construction.
3 Review
Whiteside Router Bits are made with Premium Carbide. Precision ground for proper balance at high RPM. Industrial Quality.
3 Review
Squareness is ± .0.0002". Black granite squares are more durable than pink granite and help to avoid scratching. A calibration test sheet from the manufacturer is provided. Square has a round hole so it weighs less and is easier to handle.