Header banner
Revain logoHome Page

Beduan 🚰 Hydraulics, Pneumatics & Plumbing

Beduan
All: 25
1 inch beduan brass electric solenoid valve, 12v normally closed air valve for water, gas, fuel, and oil logo
Revainrating 3 out of 5

10 Review

Durable brass construction and a quality copper solenoid. And high quality copper coil, NOT aluminium coil. Port Size : 1" Female NPT , 2W160-15. Voltage: DC 12V. Temperature Range: 41-185°F , Working Pressure: Water/Oil 0-0.5 Mpa ; Air 0-0.7 Mpa. High quality normally closed electric solenoid valve for air ,water or oil.

12v brass solenoid valve, 3/4" electric air valve for water, air, gas, fuel and oil - normally closed by beduan logo
Revainrating 3 out of 5

10 Review

Durable brass construction and a quality copper solenoid. And high quality copper coil, NOT aluminium coil. Port Size : 3/4" Female NPT , 2W160-15. Voltage: DC 12V. Temperature Range: 41-185°F , Working Pressure: Water/Oil 0-0.5 Mpa ; Air 0-0.7 Mpa. High quality normally closed electric solenoid valve for air ,water or oil.

1/2" hose barb beduan 3 way shut off brass y shaped ball valve - 2 switch control logo
Revainrating 3 out of 5

10 Review

premium stainless steel elbow fitting for home brewing - 1" hose barb x 1" male npt by beduan logo
Revainrating 2.5 out of 5

4 Review

Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability. Size: 1" Barb to 1" NPT Male fitting. Temperatures range from -40 to 160 F. 90-degree elbow for connecting hose to threaded pipe at an angle. Fitting connects to hose on one end and has an NPT male connector on the other.

beduan stainless steel cast pipe fitting, coupling, 1/2" x 1/2" female threaded (1" length, pack of 2) logo
Revainrating 2.5 out of 5

4 Review

Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability. Type: 1/2" Female x 1/2" Female thread, near 1" length (exact 27mm), pack of 2. Operating temperature: range from -65 to 250 degrees F. Widely use: Pipe threads are use widely for pipes and easy to replace and install. Durable: It is a good…

Read more about this product
premium quality beduan 1.5" sanitary tri clamp - heavy duty 304 stainless steel - pack of 2 with wing nut for ferrule tc 1.5 logo
Revainrating 2.5 out of 5

2 Review

Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability. Tube OD: 1.5 inch, fits 1.5 inch tri-clamp. Fit for all other homebrew stuff sanitary fittings. Easy tighten thumb screw with wing nut. Gift: Buy clamp and get same quantity free silicone gasket.

stainless steel bulkhead fitting with 1/2" hose barb for easy plumbing installations logo
Revainrating 3 out of 5

2 Review

Made of high quality stainless steel, corrosion resistance, ductility at high temperatures, and low magnetic permeability. Bulkhead union coupling for connecting two hoses with the same diameter in a straight run. Temperatures range from -40 to 160 F. The mini-barb ends are push-to-connect and do not require hose clamps. The joint of two openings are…

Read more about this product
effortless ro water tube connection with beduan water push to connect quick connect fitting pack of 16 logo
Revainrating 1 out of 5

2 Review

No tools required, easy to install, quick connect fitting. Mini quick connect push 1/4-Inch tube OD. Standard fitting for water filter systems and RO Water System using 1/4" water filter tubing. Provides a permanent/removable leak-proof connection. Suitable for water and food applications

beduan pneumatic hose tubing pipe 3/16" id 39.4ft 12 meter pu fluid air compressor tubing line or fluid transfer (blue) logo
Revainrating 4 out of 5

2 Review

PU Tubing Pipe Material: PU( Polyurethane ). PU Tubing Pipe Size: 3/16" (Inside diameter) , Package Total Length:39.4 Feet (12meters). PU Tubing Pipe Compression-Resistant : 0.8MPa(8.5kgf/cm2); Tensile Stress: 550kg/cm2; Use Range: Pneumatic Tools. Tubing Pipe Working Temperature: -40 -176 °F/-20°C--80°C; Working Pressure: 1Mpa; Burst Pressure: 2.5Mpa…

Read more about this product
2 inch sanitary tri clamp type stainless steel beduan flow sight glass with in-line viewing window logo
Revainrating 1 out of 5

1 Review

Body material:Stainless Steel 304. In-line sight glass flow pipe OD:51mm. Ferrule OD:64mm, Fits to 2" tri clamp. Max pressure:120 PSI. Max temperature: 300°F. Sight glass flow indicators provides a full 360 degree to observe fluid flow in any direction. Sanitary sight glasses are designed for sanitary applications used in the food, dairy, and…

Read more about this product
precise air flow control with beduan pneumatic push to connect 90 degree valve fitting logo
Revainrating 3 out of 5

1 Review

Body Style: Air Flow Control Valve. Fluid Type:Air Vacuum (no freezing). Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC. Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR ; Lock Claw:Stainless Steel(SUS) ; Body:Plastic(PET). Working Temperature:0-60°C | 32~140°F ;Negative Pressure:-100Kpa | -29.5 In Hg

5-pack beduan pneumatic push to connect air flow control valve adapter fitting, 4mm tube od x 1/8" male thread elbow 90 degree switch. logo
Revainrating 2 out of 5

1 Review

Body Style: Air Flow Control Valve. Fluid Type:Air Vacuum (no freezing). Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC. Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR ; Lock Claw:Stainless Steel(SUS) ; Body:Plastic(PET). Working Temperature:0-60°C | 32~140°F ;Negative Pressure:-100Kpa | -29.5 In Hg

5-pack beduan pneumatic push to connect air flow control valve adapter fitting, 4mm tube od x 1/8" male thread elbow 90 degree switch. logo
Revainrating 2 out of 5

1 Review

Body Style: Air Flow Control Valve. Fluid Type:Air Vacuum (no freezing). Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC. Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR ; Lock Claw:Stainless Steel(SUS) ; Body:Plastic(PET). Working Temperature:0-60°C | 32~140°F ;Negative Pressure:-100Kpa | -29.5 In Hg

pack of 2 stainless steel 1/4" hose barb splicer mender coupler fittings with round union for improved connectivity logo
Revainrating 5 out of 5

1 Review

Material: Made of 304 stainless steel, strength and resistance to corrosion. This Fitting is 1/4" barb hose, suitable for hose tubing with 1/4" ID (Not for poly pipe). Maximum working pressure of 2800 psi. Temperatures range from -868 to 1472 °F/-500 to 800 °C. Barbed retracting locks for easy slide-back connecting and disconnecting.

1/2" tube od x 1/2" npt male 90° degree elbow push to connect air fittings adapter (pack of 5) by beduan brass bpl logo
Revainrating 1 out of 5

1 Review

Type:Push in fitting/Push to connect /Size:1/2 " Tube OD x 1/2" NPT Thread. Fluid Admitted:Air Vacuum Water (no freezing). Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC. Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR/ Lock Claw:Nickle-Plated Brass /Body:Nickle-Plated Brass. Working Temperature:0-60°C | 32~140°F/Negative Pressure…

Read more about this product
40 pack of beduan 1/8" od brass compression fittings & ferrules sleeves. logo
Revainrating 3 out of 5

1 Review

Tube Size:1/8" OD. 3mm OD. Type: Sleeve ferrule. Material: Brass. Corrosion resistance, ductility at high temperatures, and low magnetic permeability. 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C). Package Include: 40pcs sleeve ferrules

5/16 inch brass compression fitting sleeve ferrules (pack of 40) logo
Revainrating 1 out of 5

1 Review

Tube Size:5/16" OD. 8mm OD. Type: Sleeve ferrule. Material: Brass. Corrosion resistance, ductility at high temperatures, and low magnetic permeability. 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C). Package Include: 40pcs sleeve ferrules

4-pack beduan brass hose barb reducer, 1/2" to 3/8", air water fuel fitting splicer mender union logo
Revainrating 3 out of 5

1 Review

Material: Brass. Connections: 1/2" x 3/8". Type : Barb Hose Mender/Splicer Reducer. Adapter for connecting a hose to a hose threaded connection of a different diameter. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Temperatures range from -40 to 160 F. 150 PSI maximum working pressure. Contains no lead…

Read more about this product
1.5 inch beduan sus304 butterfly tri clamp valve with silicone gasket - 1" tube od clover type logo
Revainrating 3 out of 5

1 Review

Body material:Stainless Steel 304. In-line sight glass flow pipe OD:25mm. Ferrule OD:50.5mm, Fits to 1.5" tri clamp. Max pressure:250 PSI. Max temperature: 300°F. Used to make a fluid start or stop flowing through a section of pipe. The pull style handle allows you to set the valve in four different positions simply by pulling and turning.

stainless steel 1/4" npt male x 1/4" npt male 90 degree street elbow cast pipe fittings for water, air, and fuel applications by beduan logo
Revainrating 3 out of 5

1 Review

Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability. Type: 1/4" Male x 1/4" Male thread. Maximum working pressure of 19MPa/2800 Psi, Temperatures range from -868 to 1472 °F/-500 to 800 °C. 90-degree elbow for changing flow direction between pipes. Fitting connects to same Male thread on both two…

Read more about this product
Didn't find what you were looking for?
If you could not find on our platform the desired company or product for which you wanted to write a review, you can create a new page of the company or product and write the first review on it.