π§ Milling Accessories
5 Review
Solid carbide spiral ball nose tapered router bit. 2 flute, 1/4" shank, 1-1/4" cutting length, 2.0mm tip diameter, 3.92Deg, H-Si coating, 55HRC. Mostly used for 2D/3D engraving work, detail carving. The cnc router bit suit for wood like Plywood, OAK, MDF, and metail like alloy copper, have long service life for sharp. This route bit suit for CNC routerβ¦
Read more about this product5 Review
Package contents ---- 4 type bits each 10pcs assorted in 4 storage cases (will meet most standard milling applications), including 2-flute 3.175mm shank spiral bits/2-flute 3.175mm shank ball nose bits/titanium coated 1-flute 3.175mm shank spiral bits/2-flute 4mm shank straight bits. Premium quality ---- Precision edge-grinding technology; long serviceβ¦
Read more about this product5 Review
1.Four flutes produce a better finish than fewer flutes. 2.Material: HSS ; Imperial Units, not Metric . 3.One Set of end mill bits Including: 6 Different kinds of Inch Size:1/8",1/4",3/16",5/16",3/8",1/2" end mills to meet your need. 4.Hardness of metal for above HRC 45 degrees,with high bending resistance and abrasion resistance, exclusive to HIGHβ¦
Read more about this product5 Review
6 piece HSS end mill set. 2 flute, single end. Center cutting. Includes 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" end mills. All end mills have 3/8" shank.
5 Review
Ground From Solid. Center Cutting. Used for slotting, ramping, pocketing and plunging operations. Preferred for small and medium removal rates on soft, tough and long chip materials such as aluminum, copper & brass. Used for general purpose machining of both ferrous and nonferrous materials.
5 Review
Used For: Aluminum. For CNC milling and routing on aluminum and plastics where a clean bottom surface edge of material is required. Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool. For use on CNC, table mount and handheld routers. Polished to a mirror finish from a solid carbide rod for precision & accuracy.
5 Review
STANDARD: Cutting edge diameter: 0.8mm / 0.031"; Shank diameter: 3.175mm / 1/8"; Cutting edge length: 5.5mm / 0.22". MATERIAL: Use of ultra-fine grain carbide material with good milling and cutting performance, ensure high work efficiency. FEATURES: High hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistanceβ¦
Read more about this product5 Review
Made In the Chinaβ HRC 55 β 1/4 Shank diameter β 1" Length of Cut β 2"Overall Length β 2 Flutes.
5 Review
γSPECIFICATIONSγEnd mills for aluminum with 1/8β shank, 1/8β cutting diameter, 7/16β cutting length and 1-1/2β total length, 2 flutes with flat top, 5 pieces included in the package. γHIGH PERFOMANCEγThese end mills for aluminum are designed for perfect surface finish because of the effective chip removal. With the long service life they are suitableβ¦
Read more about this product5 Review
Suitable material: die steel, cast iron, carbon steel, chisel tool steel, normal iron material. Cutting edge is double-edged, angular distribution was given, more teeth, smooth cut. Safety instructions: Razor blades permanently enclosed in a cartridge or housing with less than 2mm of blade exposed. The bladed product is not use for people under 18 yearsβ¦
Read more about this product5 Review
Chamfer End Mill With 60 Degree, 1/4" Shank Diameter, 2" Overall Length. The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End. 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface. Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF Andβ¦
Read more about this product4 Review
Material: Solid Tungsten carbide. Dimension: 1/8" Shank (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 17mm. Overall length, 45mm. 5pcs Downcut Double Flute Spiral CNC Bit: Ideal For carving/cutting/engraving/milling/slotting/sculpturing in materials like MDF, ABS, PVC, acrylic, nylon, resin, plastics, density boardβ¦
Read more about this product4 Review
Used in a milling machine to find the workpiece edge. All working surfaces are hardened and ground.
4 Review
Top Quality: Made from HRC55 Carbide with AlTiN Coated that is very tough, resists wear and offers high cutting performan;. AlTiN Coating: Titanium aluminum nitride (AlTiN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatingsβ¦
Read more about this product4 Review
standard : Cutting edge diameter: 1.5mm / 0.059"; Shank diameter: 3.175mm / 1/8"; Cutting edge length:8mm / 5/16" ;Color: silver. material : Use of ultra-fine grain carbide material with good milling and cutting performance, ensure high work efficiency. features : High hardness, high wear resistance, high strength. Have sufficient bending strength andβ¦
Read more about this product4 Review
4Pcs Tapered angle Ball Nose End Mill / carving router bits. Universal 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated build-up heat resistant; high grade carbide keeps its edge with no edge chipping. Ball Radius: 1.0mm, Flute Length: 1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 3.92Deg. The bits for 3D, CNC,Engraving machine.XCarving Route Cutβ¦
Read more about this product4 Review
200 pieces. To be snug into the stiles and rails to keep panels perfectly centered while allowing for expansion. Specially designed to spring back indefinitely, they don't lose elasticity. Rectangular shape makes the strips easy to handle. Typical doors require 4 to 8 strips each.
4 Review
Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety ofβ¦
Read more about this product