Review on MICTUNING HD 14AWG 300W LED Light Bar Wiring Harness with 40Amp Relay, Waterproof Switch, and ON-OFF Function - 2Lead by Chris Hanson

Used this hanger to mount ceiling lights on my FJ-C. Can't match the price it would cost to build your own harness. Decent wires. Unfortunately they are not long enough for a roof mount (at least on the FJ). I had to add extra wires to the power accessory (not a big problem). The problem I had was that if you installed the relay in the engine bay, the wire was long enough to get to the battery, but the switch wire was too short to get to my cab trim. If you installed the relay in the cab, the power wire would be too short to reach the battery (again, splicing the wires is fine!). Finally, I'm not sure if the relay was mis-set at the factory or mis-assembled. seat belt, but at first my headlights wouldn't come on. After a quick diagnosis with my multimeter I had to reverse my lighting wires (red wire from my lights to black wire from the wiring harness) - viola!. Works well. The included switch is absolutely fine, but I bought a separate switch that fits my console and doesn't interfere with the wiring harness. Not a bad suspension overall, but you have to set it up the way you need it.