Review on Grout Refresh White 8Oz Bottle by Nhyiraba Wilson

This joint sealant works as advertised. But it's not painless. You must review all available information about the app, the packaging, its videos, as well as the website. Our white grout on white tile was badly soiled when we bought the house and all my bleach cleanings haven't turned it white again. Here are a few tricks I figured out after decorating the laundry room, kitchen, and breakfast area. Wipe the grout and let it dry.2. My bottle had a pointed tip, like a ketchup bottle in a restaurant. I cut it diagonally, quite small. Take a toothbrush or something similar.3. I started in the laundry room, and once I got into the kitchen I realized I needed to apply a light coat of joint compound to the seams. Too much grout will leave a large bead on the tile next to the grout, which will cause problems later. As shown in the photo, avoid getting too much grout on the tile, but be sure to rub the grout into the open pores of the grout with a toothbrush or similar small brush.5. After the sealer had dried well, I used a damp microfiber cloth to wipe off the excess. First, wipe the entire surface with a towel that is not too wet. This will separate the sealant from the tile. Then focus on the seal on the tile with a damp cloth. If it is thin like in the photo it will just rub off. If the tile has a thicker bead, you'll need to use more force to separate it, even with your fingernail. with a cleaning pad, but I've found that if you touch the grout just a little bit, it removes the sealant. It worked and is much better than repointing or removing tiles. I made about 250 square meters. feet, with less than half a bottle.