Review on Misayaee Camera Parking 2012 2019 Transporter by Jeremy Meyer

2018 Nissan NV2500 High Roof. So far this product has worked great! I have ordered 3 different 3rd brake light cameras from different suppliers. None fit until I found this one. Fit is great! Including 3M foam seal. As you can see from my photos, I added a strip of clear silicone as an extra layer of moisture protection. I had to use longer screws. The OEM bolts weren't long enough and I didn't want to use the included bolts and nuts to avoid messing up the original mounting points on the car if I ever need to turn the OEM light back on. I connected this camera to my Pioneer AVH-W4500NEX. Video quality is good. I used wire splices to connect the light to avoid damaging the original brake light connector. This was done to keep the original connector in case the original brake light needed to be reinstalled. My Pioneer had the option to switch to camera when reversing or be activated manually, not in reverse. My main unit has its own guides, so I will cut the loop wire on the camera harness that disables the cameras built into the guides. I waited to make sure it was working properly before cutting this loop. My main unit's guide lines adjust to the correct position on the screen. As you can see in the image, the Pioneer Guides are the lines on the edit screen with the blue adjustment squares at the corners. For the last shot, the camera is turned on manually after cutting the extra guide loop on the camera strap to remove the built-in camera tethers.