Review on Seagate 6TB 7200 RPM HDD by Adam Libera ᠌

I did a run in recording mode through Victoria, then I did a full format and no block troubles. Did another full reading test in HD Tune. In short: write / read: 220-230 mb / s at the beginning and drops to 105-110 mb / s at the end. The discs were immediately with firmware SN04, it is even written on the label. I ated it to SN05 after reading the instructions on the fedoseyev website (type "ST6000NM0115 firmware ate" in the search and this will be one of the first links). I didn’t hear any whistles either on the SN04 firmware or on the SN05 while I was testing it. The crackling is within the normal limits of any other disc, no more, no less. The temperature, judging by the smart one, reached 51 degrees, the other up to 54 (the previous owner had them on the server in a RAID array) and at the same time, the quality of the disks according to the tests is more than good (in Victoria, one has a depression, but this is only during recording) , my temperature after three hours of continuous testing reached 45 degrees (the disk was on top of the case). I think everyone will be able to assess the quality if they look at the attached tests.