Review on 🔧 High-performance Hot Cams 7.48mm Shim Kit HCSHIM01 for Honda CRF, Kawasaki KX, Suzuki RMZ, Yamaha WR, and YZ Dirt Bikes by Mark Fleming

Only a few minor complaints so far. When I received the kit most of the pads were out of place and mixed up with different sizes. This probably happened during shipping and handling of the set, but I just feel like things should be a little better to keep all the gaskets in their grooves. Second, some gaskets were sticking together and rust was starting to build up on them. Third, there are only 3 spacers for each size. I wish there were 5 of each in the kit or at least 4. This can be a problem if you have a 4 cylinder 16 valve engine and need more than 3 of the same size. I reorganized all the pads and put them in their respective slots. The rust seems very light and can probably be wiped off with some oil. If not, a little oil and tape will surely get rid of the light rust. Apart from these small complaints, the package was complete. It even came with an eye loop, which I wasn't aware of, to help read the size listed on each pad. I haven't measured the shims to verify accuracy but will do so once I get to the valve settings and will update my review accordingly.