The solution to the problem of overheating SSD approached with all seriousness. The paper stickers have been removed from the bottom and top of the SSD. Ali bought the most expensive COPPER passive radiator, with two heat pipes. I polished the copper sole with GOI paste to a mirror finish. I do not trust thermal pads - I used the best thermal paste for processors left after installing the Noctua air tower, thinly smeared the controller and two memory chips. In the middle, small chips do not provide contact with the sole, but I decided to neglect this. The result exceeded expectations - the temperature dropped by 7-10 degrees, the destruction of Windows system files stopped. The second temperature sensor is located just in the non-contacting chips, so with the previous aluminum radiator, the temperature difference of the sensors was 2 degrees, and now it is 6 degrees. In the most difficult tests, the temperature of the controller (and it is the hottest) did not exceed 49 degrees. The PC case is very ventilated. Copper has not been canceled!
36-Pack Black Rubber PC CPU/Case Fan Screws/Rivets Set for Computer
11 Review
uxcell 3.5" HDD Screw Black 200pcs for Computer PC Case - Flat Phillips Head - 6#-32 - Hard Drive Fasteners
10 Review
M.2 Screw Kit: Easy Mounting for NVMe SSDs on ASUS Motherboards
19 Review
MacBook Retina 13-inch (A1425, A1502) and 🔩 15-inch (A1398) Bottom Case Screw Set with Pentalobe Screwdriver
11 Review