Review on 🔑 Dovelock Starter Size by Kurt DJ6SK by Will Schimmel

This is a special Dovelock master jaw set that we use with the Kurt Dx6 cross vise. Our family no longer has active machinists, but there is plenty of equipment. The only active locksmith in the family has now become the most passionate person who likes to experiment with tools. Many of us have many tools from different brands, including high-quality Kurt, a more professional brand than the one used by many. visual effects with instructions. Figuring out how to install the jaws wasn't difficult and there are several tutorials online. The kit is very well made, perfectly milled and obviously built to last. We store the Dovelock in the original packaging (box) and would like Kurt to offer a more secure storage option if we haven't already done so ” DJ6 Dovelock Aluminum Clamps 4 Socket Head Cap Screws 1 Unillustrated Instructions Page DOVELOCK MASTER JAW INSTALLATION INSTRUCTIONS: (Instructions included)1. Remove the table top and rotate 180°, then rotate 90° so the table top is facing down past the bottom of the jaw and the table top guide is facing out, then secure the table top with the screw.2 . Place the jaw on the base of the vise so the fence hangs over the base of the fence.3. Move the jaw so that the table stop is against the side of the vise and against the fixed or movable jaw.5. Remove the screw holding the table top and put the table top back in its normal position. DOVELOCK JW INSTALLATION INSTRUCTIONS:1. WIDE JAVA 6 INCHES. Loosen the stop screw, extend the stop over the end of the main jaw and tighten the screw.B. Either slide the jaw to the side or load it from the front. C. Snuggle up against the tabletop.D. Tighten the middle clamp first, then the outer clamps.2. WIDE JAWS 7, 8 or 10” (not available)3. Side Jaw Slider: A. Rotate each jaw 1 full rotation (360° x 1) to insert or extend new jaws4. Front Loading Jaws: A. Make sure there is at least a 5/16 gap between the B: jaws. Rotate each clamp 3 full turns (360° x 3) and slide the clamp straight out and up.