Review on 🔦 Fahren Waterproof Headlight Conversion Kits - Upgraded Lights & Lighting Accessories for Headlights Conversion by Jason Hutchinson

So installation was easy. I had to send a second set because the first one was defective. It was a quick turnaround, so that's a plus for the company. Thanks for that. An important tip for those who find that the light is not reflecting properly is to use the small Allen key provided to dim the light and adjust it to the correct angle. For people who don't understand this angle, it should sit "vertically" in the case, not horizontally or at any other angle. Once I adjusted the lamp to the correct angle, these lights shone much brighter and looked much better. This is especially important for projector headlights. You need to look at the installation position of the lamp in the housing, make a mark/line on the top of the lamp housing, and then remove the lamp. Again follow this line to the actual lamp grooves as this will be your installation location. If the label and the actual light are not aligned vertically, you will not get the correct light output. Using an Allen key, loosen the small screw and rotate the bulb to line up with the mark/line you drew on the grooves. Put the lamp back into the case and you should see a big difference in light output.