Review on 🚗 Dorman 749-602 Power Window Regulator - Mini Cooper Front Passenger Side by Chris Cruz

Dorman window regulator is longer than stock but top screw holes on Mini Cooper are cut out. They were almost too long for the screws to turn, but they did and I was able to tighten them. The 3 bolts holding the bracket that the window regulator motor attaches to are a different story. The 3 screw holes on the bracket were about 1/8" higher than the mounting holes in the door skin. I didn't want to drill new holes in the door to install it properly so I angled the screws and was able to tighten them. I am not sure if i will have problems in the future but if i do i will buy a mini next time other than that the windows seem to work fine after i adjusted the fit you can use a 5mm or 3 /8 allen wrench to loosen the sprockets holding the glass in the regulator but I would recommend buying one. https://www.amazon.com/Mrcartool-Window-Wrench-Compatible-2002-2008/ dp/B086JLWC36/ref=sr_1_4?crid=2TJ40JPQ188D4&dchild=1&keywords=mini+cooper+window+regulator+tool&qid=1626622551&sprefix=mini+ cooper +window++%2Caps%2C149&sr=8-4 I hope this review is useful for someone.