Review on Induction hob Iplate YZ-T24, black by Vassil Georgiev ᠌

The plate is designed specifically for distillation. But this is only how the project has specials. appointment. In fact, the plate does not fulfill the stated features. Well, for example: continuous work 24 hours. The first time after turning on the network, it works for 3 hours (even though how you set this timer), after the next turn on, the timer 24 or which one you set may work, or it may not work. Never works 24 hours straight. This is a base. The electronics of the stove are noticeably sensitive, something leads to failures, so the temporary mode does not withstand. Another setup is the sensors are extremely sensitive to everything that touches them. It can turn on even a small fly, drops of water, or you just put something on it and it immediately turns on. Any light touch in the area of ​​the sensors guarantees switching on, switching off and other signals. We must not forget! pull it out of the socket when you leave, otherwise if you have an unfinished process on it, assembled into the ceiling, it can turn on while you are not at home, it will naturally not open the cooling itself, so it understands what you can expect when you return Immediately At the verification stage, it appeared that not all modes with a step of 100 watts work. After the pulse mode 1000 - 1 kW consumes 12022 kW, after this mode 1100 consumes the same amount, after that 1200 consumes 0.03 more, then the step of increasing the power is approximately 100W. That is, already three modes in 1000, 1100 and 1200 give out the same 1140 watts each. And they consume and give out such power, please the managers of this brand do not make excuses in the comments when working for a long time in one mode, when switching to 100 watts more or less, the stove often turns off. The sensitivity of the electronics is also manifested. Or there is no power change at all. restart if the stove cools down completely and sits for about 6 hours Naturally, I measured all this with a high-quality wattmeter The sensors are also very sensitive to wet rags and if you just moved the dishes on it