Header banner
Revain logoHome Page
Adam Paka (Adam Trab ᠌ photo
1 Level
325 Review
0 Karma

Review on Mount Arm Media LCD-T22 black by Adam Paka (Adam Trab ᠌

Revainrating 5 out of 5

I am delighted, the product is really worthy.

The first installation with height adjustment will have some trouble, but this is adjusted once and forgotten until the next replacement of monitors or desktop. It came with an Arm Media LCD-T12 bracket for mounting three monitors (this option seemed more acceptable in terms of installation flexibility than the bracket for three monitors at once).

Updated 10 months ago
Rating has not been changed

I wanted to share some photos to provide more context to my review.

review_update_image_alt



Pros
  • -Good build quality; - Availability of connectors for mounting VESA 75x75 and 100x100; -Easy installation (installed by screwing parts to each other by 4 bolts, each monitor sits on a VESA mount for another 4 bolts, the total time to install the entire device together with monitors is about 10-15 minutes); -Wide spread for two monitors (in the current configuration it costs 29 inches + 24 inches, but it feels like 34 + 27 would also fit) - Mechanism with a gas spring (practically does not transmit shaking from the table to the monitors); - Possibility of flexible adjustment of the position of the monitors (the mechanism for each of the monitors consists of 3 bending parts that allow you to rotate the installed monitors in all axes and parameters); -Availability of tools and bolts/washers included (hexagon + hex + screwdriver).
Cons
  • -Probably not the most convenient performance of adjusting the stiffness of the gas spring, but there is nothing to compare with; -There may be problems with the outreach of the arms of the bracket and the impossibility of installing the table directly to the wall, but there are three options: 1. Tinker with the position of the bracket relative to the table, a compromise position is not so difficult to find. 2. Pull the monitors/table towards you. 3. Drill a hole in the table and install on the supplied bolt, not on the clamp.