Mount Arm Media LCD-T22 black Review

I did not think for a long time when buying and took this bracket, because. the reviews were normal and I didn’t regret it at all, the workplace began to look much neater, and now I turn the monitors and move them as my heart desires.

I was looking for a second monitor, but the size of the table could not accommodate bulky stands, and then I stumbled upon this miracle. The price may be a bit high, but the quality is fully justified. Even on one bolt it keeps perfectly, does not stagger, put it in 20 minutes, taking into account the fact that the table was still drilling.

There are many pluses, but the minuses in my case are critical, they regretted the length of the studs - it's just ridiculous. It is not at all clear what the money is for.

The arm was chosen to be able to carry much more weight than the current two monitors at the time of purchase, so that when buying new monitors (which is inevitable over time), you do not have to buy a new arm. This decision has already justified itself, so I do not recommend choosing a bracket by weight close to the weight of your monitors.

Until I installed the bracket, I could not figure out how to fix the position of the gas lift - without a monitor, it straightened out. It turns out that he himself retains his position if you fix the monitor on it (and it is possible to adjust the gas lift force with a key), and changes only if you apply a little effort.

The first installation with height adjustment will have some trouble, but this is adjusted once and forgotten until the next replacement of monitors or desktop. It came with an Arm Media LCD-T12 bracket for mounting three monitors (this option seemed more acceptable in terms of installation flexibility than the bracket for three monitors at once).

Super, I advise! Pros: Price. Build quality. Set of different bolts included Fastening variability - clamp or through a hole in the table Some cons: There are no special ones. Not the most convenient system for cable management, but if you install it once and forget it, it's OK.

I recommend to buy. Different pros: Structural strength, I have been looking for a desktop crane for my diagonal for a long time. Weighs perfectly (32" Odyssey G5 Gaming Monitor [S32AG520PI]), fixed, installed, everything is perfect. With its cons: the only thing you can not install closely monitors with each other, since the table itself is pressed against the wall.

If your table is against the wall, then this bracket is not for you, but if, like mine, towards the room, separating the work area from the room, then it is ideal. Got pros: It looks very strong and reliable, weighs a lot, holds monitors perfectly, the metal is thick. With its cons: The adjustment takes place with an effort that you are already afraid of breaking the monitor, but it can be developed later. Not a convenient hex screwdriver included, it would be better to put a screwdriver and a…

Has pros: holds monitors well and practically does not stagger when shaking (rather rigid construction). fasteners made of very thick metal. Some cons: 1. The fastening lamb prevented it from being placed on the edge of the table, as it rested against the back wall of the table. I had to drill a hole in the table to mount it the second way. 2. when mounting with a hole in the table, the entire structure rotates together with the base on the bolt axis. it was necessary to fix it with 2 bolts or…

I am satisfied with the purchase, for this money at the time of purchase it was difficult to find something close in quality and immediately for 2 monitors

For a very long time I was looking for a similar bracket so that the table was more free and the screens were at eye level. Previously, there was just a wooden stand on which the monitors stood, but it took up a lot of space and did not look very aesthetically pleasing. The best solution would be to hang them on the wall, but you don't want to ruin the wall. If the depth of the table is 80cm+, then you can safely set it, you will be able to pick up any position. In my case, the depth of the…

Definitely recommend, simple and reliable. Different pros: Possibility of fastening through the table and on the bracket Staple for different thicknesses, both for thin and very thick tables Holds well when set up Configurable with a key Included Comfortable long for monitors less than 32 inches Good load capacity Included were the mounts (bolts) for vesa monitors Its cons: The load capacity is excellent, but to load it you need two monitors of 40+ inches, but the trouble is, with such it will…

I took it with a backlog on the second monitor, and, apparently, it will be soon) With its pros: Easy installation, securely fixed even without drilling the surface for mounting the clamp (there is such an option) Very comfortable cable channel, looks much cleaner Very well made, albeit made of plastic. Some cons: I don’t know if this could be a drawback, but at the lowest position, the monitor (27 ") falls down under its own weight - as if the gas lift gives an oak. But for me this is not a…

I use, I'm satisfied, 2x27 'monitor, the price, although it seems not small, is much more adequate than analogues. Pros below: Haven't used one like this before, so I don't have anything to compare it to. A thing worthy for half a year lives perfectly, Cons below: sometimes you want more height when lowering down, my 27th monitor hits the table, I don’t really understand why it’s like that, it seems that it was possible to throw 10 centimeters in height so that it doesn’t fight and could be…

Someone wrote that the laptop overlaps the monitor. I myself was worried about this, but no problems, you can choose the position for any height from the table. Although I use 24 'monitors, there may be problems on a larger diagonal. Has pros: Can be adjusted in almost all planes. Finally, no need to drill the wall. It gets along well with a table that has height adjustment (for standing or sitting work). Hold even old dense heavy monitors. Some cons: Not a drawback, but a feature: the table…

I was considering a bunch of different options for the house to get rid of coasters that take up half a table. In terms of price-quality ratio, perhaps completely satisfied in both respects. At first, I didn’t figure out how to fix the bracket knee - I constantly pulled the monitor under its own weight, twisted the fixing bolt for a long time, but he didn’t want to fix the structure. Apparently, the thread is too small and it takes a very long time to turn (many turns), but carefully - judging…

Pros: Massive fastening system that gives stability. Assembly and dismantling without damaging the countertop. Its cons: For fastening, the table has to be moved away from the wall a certain distance, which is important for some.

With its pros: Excellent bracket, two 27 monicas, the table was unloaded, beauty. Cons below: Instruction. I was able to assemble and configure only after I found an overview of the assembly on YouTube.

Still, it was probably worth taking two separate paws for two monitors. There would be more opportunities to arrange them conveniently, and even a laptop would fit normally. Its pros: In principle, a functional holder and allows you to place two monitors in a fairly wide range of positions. But this is if you have them fixed statically. If you plan to move them - not very suitable. The cable channels are made quite conveniently and the mounting of the monitors is also well thought out. It is…