The opinion can be VERY subjective, because before that they used an HP inkjet printer. Let me explain for the lucky ones who have not dealt with inkjet printers: to start printing after the printer has been idle for more than a week: 1. refill cartridges 2. clean the head 3. print 2-3 test pages 4. try to print what you need 5. swear, because while the head was being cleaned, the ink ran out 6. refuel 7. print 8. swear because the alignment is off 9. perform adjustment 10. according to the adjustment sheet, understand that blue does not print 11. swear because he got involved with this vacuum cleaner in the first place 12. curse the salesperson who talked about the fact that an inkjet printer is profitable and easy 13. print in black and gray 14. get a white sheet because GLADIOLUS and this problem is not described in any manual 15. send to print as is 16. get a sheet with an empty middle 17. repeat step 15 10 times 18. get 2 sheets with an empty middle, 3 with an empty beginning and 5 empty sheets 19. write by hand With this printer: 1. send to print 2. take a printout from the printer
💻 Pantum M6552NW Laser Multifunction Printer with Wireless Networking and Mobile Printing for Large Paper Capacity in Monochrome
27 Review
Laser printer Brother HL-L2340DWR
54 Review
Renewed HP Laserjet Pro M28w Wireless Printer with Copy & Scan Smart App Capability - W2G55A
97 Review
MFP laser HP Laser MFP 135w, b/w, A4, white/black
32 Review
🖨️ OKI MICROLINE 320 Turbo Mono Dot Matrix Printer: Dependable and Efficient!
7 Review
Epson LQ-590II Monochrome Dot Matrix Printer - 24-pin
7 Review
Canon RP-108 Cartridge Set, 8568B001, Multicolor
3 Review
🖨️ The Ultimate ID Card Printing Solution: Magicard Enduro 3e Single-Sided Printer Bundle with Supplies & Card Imaging Software
10 Review