Laser printer Brother HL-L2340DWR Review

The printer turns on and connects to the PC and phone without any problems. During the use (4 months) there were no difficulties to bring him out of deep sleep. There were no errors. After the purchase, I first used it with a Wi-Fi connection to a PC, then via a usb cable, as I moved the PC to another room, to which the LAN cable does not reach. Quality packaging.

In general, only positive emotions Has some pros: wifi printing, no wires other than power) paper tray Ease of use Different cons: It seems that it makes a loud noise, but somehow it does not bother. For some, mb will be a minus

Beautiful, good model, bought as a replacement for an inkjet. No dry ink, fast printing, convenient high-capacity tray. Ability to print over wifi. Installation anywhere, no wire length limitation.

The setup is not difficult. Installed in the network via wifi. Connected on the second try using wps. On all computers with windows 10, it was determined over the network without problems, but duplex on them became possible only after installing the drivers from the disk.

Pros: work on wi-fi, compact, there is a built-in paper tray, two-sided printing, a proven company Some cons: the speed of printing via wi-fi is quite low, you sent a document and you are waiting for it to load into memory when it starts printing. That's the price you pay for not having extra wires.

When ordering, add the USB cable to the basket immediately. It costs a penny, but with it the initial installation will be very fast. Well, look at the site for the password for the web interface. It has now changed in new firmware. Its pros: Long time choosing a printer. Needed to: - printing was economical (here only laser) - so that you can print with long breaks (only laser again) - to double-sided printing (when printing a large number of documents, paper consumption is halved) - and to…

For a couple of hours, there was not a single device left in the house that would not print something on this printer. It’s very convenient, it’s like a network one, and as if any device with wifi can print something on it. It heats up pretty quickly, stamps quickly too.

Bought for the children of students. I'm not happy. Prints well and fast. Pleased that there is wifi. The main thing in the settings is to remove it so that the printer does not swear at the expiration of the estimated life of the cartridge.

The test cartridge probably replaced sheets after 500-600, then it was replaced with a new one. The replacement is simple.

I have been familiar with printers of this generation (2300, 2340, MFP 2720 and 2740) for a long time at work, with a moderate load they work perfectly with normal consumables - the print quality is constant, they do not chew the paper and do not pick up two sheets. This model is quite old, but the reliability and availability of consumables should not cause problems. Instantly picks up WIFI network with WPS. Supports access restriction, can write letters on configured events.

A normal, unpretentious printer, with fast printing and inexpensive consumables. Pros: Fast, print quality, simplicity and low cost of service, WI FI is nice to have. Has cons: It stinks when printed with plastic. I couldn’t defeat double-sided printing, the sheet pulls back but does not want to print the second side (((

Unfortunately, I got it with a marriage - with a wild creak and noise, I tried to grab an A4 sheet from the print tray. However, out of 20 times, it was possible to do this only twice - by giving out a chewed sheet with the text on the side. In other cases, either does not see the paper, or produces a jam. Passed. When manually feeding paper, no complaints about print quality and speed.

I set it up via a cable (it costs 150 in an electronic hypermarket). Before installing, I watched YouTube videos on how to install this model. Viewing helped a lot, at least mentally prepared. On the installation disk, when choosing a language, I did not immediately understand that the 2022 language is also on the list, and that it needs to be found by rewinding the list down. At first I thought that I could only choose English, Slovenian or Finnish)) Now I'm waiting for the ink to run out…

I attempted to connect to Wi-Fi but was unable until I called Support, from which I was able to set it up step by step. This was caused by the absence of an instruction manual in the kit, which is based on the assumption that you can start printing right away. After then, however, for some reason the settings disappeared, and printing became impossible as a result. It is strange, there is no time to deal with it yet, support did not answer calls, it is essential to deal with the settings on the

I've simply described the WiFi connection up until this point. The initial setting on the attached piece of paper was only useful prior to network connection. Following the directions on this piece of paper, I turned off the router after several dreadful seconds. Then, I went to the Brother website and installed everything in accordance with the directions there without a USB cable or an enclosed CD. There is a clear and comprehensive video installation instruction on the brother website. After

There was such a printer at home. He worked for a year and a half in a sparing mode. At one point it stopped turning on. Blinks the display and that's it. Took it to the company service center, 3-year warranty type. The service center, after thinking for a month, refused to repair for some unknown reason. That's the whole guarantee . I DO NOT RECOMMEND for buying both this model and the company as a whole due to the unreliability of the products, and I also want to congratulate you on the…

I was looking for a printer for the home, to replace the old inkjet. Needed network printing and seamless printing from an Android phone. Initially, I considered cheaper printers, without duplex printing, but this one was a good discount. Came with firmware 1.06 out of the box, immediately ated to 12022, connected via Wi-Fi in five minutes, just select the network, enter the password and install the driver on the computer. You can not even enter a password, but connect via WPS or AOSS, if the…

Pleased with the printer. Receiving information is a little slow when printing, but this is possible due to the wireless connection. And yes, at first there was a problem with getting out of deep sleep. Resolved in an unexpected way. The PC to which the printer was first connected was no longer new and was out of order. We bought a new one, but when the printer was connected, the drivers from the disk did not install. Agreed with what Windows suggested. And now it comes out of deep sleep…

Has pros: The top of the printer is black and the body itself is dark grey. Looks nicer in my opinion. The presence of WiFi, though I had to tinker a bit. A working driver is located on the CD that came with the printer. The driver for Windows 10 LTSC 64x that I downloaded from the manufacturer's website turned out to be problematic in setting up WiFi. Maybe I'm wrong. Another not unimportant advantage is two-sided printing! Fast delivery, paid 07/02/22 received 07/07/22. With its cons: The onl

The provider brought 2.4 and 5 Hz into the apartment (they differ in one digit in the network name). The computer is naturally in the network at 5Hz (this is noticeable), but the printer does not find it, does not see it, does not connect to it. "Connects" with a computer on a 2.4 Hz network, no problem. I switch the computer to a 2.4 Hz network (in which the printer is connected) and everything is fine! The cable remains . Sad, upset, because. bought a printer incl. with the mandatory ability…