Review on π₯ Wathai 100x100x3mm Conductive Heatsink with Optimized Thickness for SEO by Leo Torres
Works very well. best in computer components
I first tried a heatsink on my new 1TB NVMe drive and the stress test results weren't very good. Then check the Dell service manual that says it and they recommend a thermal pad between the drive and the motherboard. The problem is they don't tell you how thick it should be. Used the end of a pair of calipers to take some measurements and concluded it should be either 4mm or 5mm. Tried 5mm first, bingo! The drive stays 15Β°C cooler than with a heatsink on top. A 100x100 pack will hold five 2280 discs. I had to make six, so I ordered a second one.
- 100 x 100 x 3 mm thermal pad; Thermal conductivity: 1.5 (W/mK); Colour blue; Weight: 58.5 g or 2.06 oz
- Out of fashion
New products
Comments (0)
Top products in π‘οΈ Thermal Management Products
Maximize Your Performance with Thermal Grizzly Kryonaut Grease
15 Review
XPG GAMMIX S11 Pro 512GB M.2 SSD AGAMMIXS11P-512GT-C
43 Review
Heatsink for SSD ESPADA ESP-R1, black
13 Review
Netac NV7000 NT01NV7000-1T0-E4X SSD, M.2, 1.0Tb, PCI-E x4, Read: 7200 Mb/s, Write: 6800 Mb/s, 3D NAND, 1400TBW, NVMe
11 Review
Another interesting products
π Bussmann MDL 2 Glass Delay Slow Blow
8 Review
β‘ 20 Amp Single Circuit Breaker for Q120
8 Review
π Bussmann GMA 5A Acting Cartridge Listed: Reliable and Efficient Cartridge Fuse for Your Automotive Needs
7 Review
π Enhance Your Electrical Work with Klein Tools 69411 Accessory Adapters
7 Review