Review on 🖨️ JAYO 3D Printer Filament PETG 1: Enhance Your Printing Experience by Joshua Flame

Over the years I've bought quite a few spools of filament from different manufacturers. All had the same diameter of the through hole in the coil. This manufacturer decided they needed to use a much larger opening so the reel seat I have won't work. I'm also not sure if the reel really weighs 1kg. I have no way of measuring accurately. With the same outer diameter of the spool and the width, the larger center hole usually means less thread. I did a test print. So far it prints well enough. It was the main body without ledges. I've noticed that I've had more trouble removing supports than with other brands and the same settings. Edit 3/12/21: About 10 hours after the 17 hour print, the spool got tangled. It was screwed wrong. It was so tight that it pulled the spool into the machine and caused some minor damage. Be careful with this thread if you can't keep track of the car. Otherwise, you may need to readjust before long prints.