I use this in my 40 year old Weller 8200 which is currently accepting peaks. with a sharp blade, and then I burn the ends with a kitchen torch or small torch. With the RCT, I lay rope on a piece of scrap wood, hold a piece of scrap metal over the cut as a cutting guide, heat the gun for about 30 seconds on the first click, and cut along the metal. I then use the flat side of the RCT to clean up any loose strands and seal the edges. I also use a small fan to blow fumes out of my face and put on a 3M OV filter mask.
🔥 Tig Pen Rod Holder and Welding Finger Feeder by Dog River Tools - Maximize Your Welding Efficiency with our Feeder Pencil
12 Review
Continental Conti4x4Contact 265/60 R18 110H summer
23 Review
Hakko T18-BR02 Soldering Tip - T18 Series for Hakko FX-888/FX-8801 - Conical Shape - Bent 30 Degrees - R0.2 mm x 10.5 mm
12 Review
🔥 Whizzotech Solder Wire 60/40 Tin/Lead with Flux Rosin Core - 0.032 Inch Diameter for Electrical Soldering (4oz/100g/0.22lb)
13 Review
Cordiant Winter Drive 2 255/55 R18 109T
33 Review
Bit and socket set Stels Tool set, 1/2", 1/4", CrV, plastic case 94 pcs, Stels, 94 pcs, black
46 Review
Rechargeable screwdriver OA-3,6F (433.0.2.00), 3.6 V, 1.3 Ah Li-ion, blister
46 Review
Xiaomi Mijia Ratchet Screwdriver 16 in 1 Screwdriver with Interchangeable Bits, 10 pcs, Black
22 Review