Review on 🖥️ Cooler Master Q500L Black MasterBox by Kiril Tilkov ᠌

If you have a 2.5-inch disk (either an SSD or an HDD for your laptop), there are four seats on dedicated brackets on the back side of the device. If you have standard drives measuring 3.5 inches, then you can only fit two disks on each bracket at a time. However, because the case and shoulder arms are perforated, it is possible to install additional drives on either the inside or the outside of the device. The investigation uncovered some "creative" solutions to the problem. Despite the fact that it has certain issues, I found it to be enjoyable. Various advantages: However, it is still capable of housing full-fledged ATX boards despite its compact size. The power supply can be mounted in the case at any location that is suitable for the user. You have access to four out of the six possible faces for the case. Ample space for the organization of cables. The IceHammer IH-4500 tower made its way within the hull of the ship. Dust filters (two of which are attached to magnets, and one of which is attached to the bottom using rubber clips) The panel that contains the buttons and USB ports can be attached to any one of the four faces that are located on the side of the cover made of transparent acrylic. Plugs that are attached to expansion slots are secured by screws and do not come loose. There are some drawbacks, such as the standard case fan being subpar. If both your video card and your power supply are quite long, there is a possibility that the installation process will be difficult. The ventilation in the case is rated as a four, despite the presence of a large number of holes, as a result of the poor density of these holes. It is essential to install additional turntables for blowing in and blowing out in order to achieve a satisfactory level of blowing. There is also a nuance to this. Because of the same perforations in the walls, blow valves might produce an annoying rattling sound (this happened to me). It is necessary to mount the fans on spacers (or use an adapter that converts 140mm to 120mm) in order to eliminate noise. The components for four are as follows: the iron is not very thick, the side wall is made of acrylic, and the plastic kit is rather flimsy.