Ok, install was somewhat easy. Reason I say this is because I thought I had a faulty light as I will explain. As I was installing said light power was off, I am not using the dusk to dawn feature and using the cap cover. After installing the light and turning the power back on I didn't have any light on the outside with the cap over the sensor. So I installed the second light of the same make and model. And still no light. I checked the breaker box and for voltage and those were good. So I undid the light from outside and double checked the wiring. As I turned the light upside down and the photo sensor got more into the darkness of the overhang the light came on. Rotated it back to the normal position and the light went out. Ah, the photosenosor is bad right. But no it's not, it is the little plastic cap covering the sensor, it does not have enough color pigment in the cap to stop light transferring through the cap. So I just used some black electrical tape and covered the sensor and put the cap back on. And guess what, the light works as normal now. My guess is that there was not enough color concentrate added when the caps were made. I say that because I have about 20 years in the plastics industry field. I think that the cap was still semi-translucent and allowing light to come through. That's why only 4 stars instead of 5.
🌞 Sunco Lighting 12 Pack 4 Inch LED Recessed Lighting Ceiling Lights Slim, Daylight 5000K, Dimmable 10W=60W, 650 Lumens, Smooth Trim Damp Rated, Canless Wafer Thin with Junction Box - ETL & Energy Star
3 Review
💡 ECOELER 6 Inch LED Low Profile Surface Mount Disk Light, Aluminum Baffle Trim, 15W Ultra Thin Modern Fixture Lighting, 5000K Daylight, 1100lm, Suitable for 4/6 Junction Box, Energy Star & ETL Listed
5 Review
💡 Ensenior 16 Pack 6 Inch Ultra-Thin LED Recessed Ceiling Light: 5000K Daylight, Dimmable Can-Killer Downlight, ETL and Energy Star Certified
3 Review
Sunco Lighting 12 Pack LED Recessed Downlight: Selectable 5 Colors, Dimmable, 13W=75W, 1050LM, Baffle Trim, Damp Rated - Easy Retrofit Installation, UL Certified
4 Review
🔌 Robertson 2P20132 Quik-Pak: 10 Fluorescent eBallasts for 2 F40T12 Linear Lamps, Preheat Rapid Start, 120Vac, 50-60Hz, Normal Ballast Factor, NPF, Model RSW234T12120 /A (Crosses to RSW240T12120 /B)
4 Review
Fulham WorkHorse WH2-120-C Adaptable Ballast - 2 Pack
3 Review
💡 Electronic FL Ballast ICN-4P32-N (Formerly ICN-4P32-SC) for 3-4 F32T8 F40T8 F17T8 Lamps, 120V/277V Compatibility
5 Review
💡 High-Quality Advance ICN-4P32-SC Electronic Fluorescent Ballast: Ideal for 4 Lamps, 32W T8, 120/277V
3 Review