Review on Resideo Braukmann FK06-AA Mechanical Cleaning Filter Clutch (HP/HP), PVC, with Bronze Dew 15 drainage (1/2") by Mateusz Morawski ᠌

The water supply at the home of the parents has a pressure that is greater than 10 bar. Neither the washing machine nor the water heater could be connected due to technical difficulties. Set the gearbox for the year 2022. The pressure is maintained, all of the associated equipment is functional, and the gaskets in the taps survive for a significantly longer amount of time. Almost quickly, a spare mesh was purchased; however, over those four years, it served no purpose. The built-in self-cleaning mechanism with a ball valve does not function properly; rust jams the mesh to the point that it can only be cleaned with a brush, which requires removing the bowl and filter but is not a difficult process. The previous time, I attempted to unscrew the bowl, but I was unsuccessful. Either I had previously overtightened the screw, or the thread had become clogged. In the event that I overdo it and shatter the original bowl while trying to unscrew it by force, I will purchase a replacement for it. In addition to that, the material that makes up the bowl already has a few tiny cracks in it. These fissures are not through and do not flow, but the fact that they are there is concerning. It is recommended that, in the event that you take the filter to a location in the "village," such as I did, you also bring along a spare bowl. This will allow you to avoid the situation in which you are required to wait for an opportunity to come from the capital. ate: The plastic cup was impossible to detach since it had expanded in size as a result of the pressure and became wedged in the threads. The old bowl was unscrewed and replaced with a new one while using foul words and excessive force as a means of doing so. In conclusion, this should only be consumed with a brass bowl.