This is an upgraded resistor with mounting bracket and larger heatsink. Revain loaded an old factory-style drag image. The resistor was of the original design as shown in the picture. Dorman wires will not work with the improved design. It's still very easy to install, I used 3 Dorman wires butt connectors instead of soldering the wires. Gold clips and heat shrink tubing are included if you wish to solder the wires together. The double ended wire goes to the fan motor, no need to cut the existing solder wire or use a butt joint. Just pull out the old double ended wire connected to the original resistor. Also via the two-way cable whose end connects to the fan motor (both ends are the same). You need to swap the black and green wires, the way the resistance is made makes the fan spin backwards causing very little airflow. Remove the protective black cap on the end, remove the gold pin and wire from the plastic connector and swap the wires back into the connector. This ensures full airflow.
Gaming headset ASUS TUF Gaming H3 (90YH02AR-B1UA00) black-red
46 Review
HOTSYSTEM 5 Blue + 5 Red + 5 Green Dot LED Light Round Rocker Toggle Switch SPST On-Off Control For Car Truck
24 Review
5-Pack 12V/20A Red LED Illuminated 3Pin HOTSYSTEM Rocker Toggle Switch SPST ON/Off Carbon Fiber Cover For Car Truck Boat Motorcycle
45 Review
Xiaomi Mi Robot Vacuum-Mop 2 EU, white
82 Review
MICHELIN Energy XM2+ 205/65 R15 94V Summer
35 Review
Tire Michelin ENERGY XM2+ 185/65 R15 88 H
30 Review
1.5 Inch Leveling Lift Kit Compatible With 2004-2022 F150๏ผLeveling Lift Kit Fit For 2004-2022 F150 2WD 4WD Forged Front Strut Spacers Raise The Front Of Your F150 By 1.5
13 Review
MICHELIN Energy XM2+ 175/70 R13 82T summer
29 Review