Review on 🔦 VIPMOTOZ Full LED License Plate Light Assembly Replacement For Toyota 4Runner Sequoia, 6000K Diamond White, 2-Pieces by Mike Kimball

They fit perfectly but the LEDs feel a little overworked and get very hot so they probably won't last long. cool (about 1 watt power consumption versus 2 watts unchanged) and these methods should take much longer. Resistors R2 and R3 control the current for the LEDs, they are in series 1.6ohms + 2.4ohms (4ohms total), if you replace one or both, so the total resistance is about 8ohms, the Current reduced by about half and the LEDs work much colder. I replaced R3 (1.6 ohms) with a 5.1 ohm resistor so the total resistance was 7.5 ohms resulting in a drop in power consumption from 2 watts to 1.1 watts at 13.4 volts. )