Review on AUTOSAVER88 Smoke Lens OE Projector Headlamp Headlight Assembly Compatible with 2005 2006 2007 Ford F250 F350 F450 F550 Super Duty and 2005 Ford Excursion by David Schweigert

Quality of workmanship is ok. I set them to 02 F350 so I had to trim a bit to make them fit. I wish the lights had more gear but I managed. I redid the bottom of the old lights to fit the top of the new lights. I found some old body self-tapping screws that matched the threads on the new hardware and I was in business. You need to replace the parking light socket. Stock socket 02 gives a hard value of 90. I looked for socket 07 and was able to get it locally from OReilly to complete the install. The bushings of the new model are straight. Check that your headlights will fit the sockets to determine what needs trimming. The turn signal socket rubs and you have to make room. I also switched to LED headlights while I was there and I think the clear lenses and LEDs made a big difference. Especially at night. I almost feel bad for blinding people. I tipped them down as low as possible because my truck is up. Overall just a lot brighter. If you decide to upgrade to LEDs, pay attention to the orientation of the LEDs in the headlight. You may need to remove and reinstall them to get the LEDs lined up properly with the reflectors. I went all the way through one side and then just pushed off my efforts on the other side. It's a lot of post-processing, install/remove them again, so be patient and take your time. Hope this helped someone!